Xerox Printer manual Section Times, Do Nusec 3 AT 1,1 Repeat Horizontally Every

USING HFDL COMMANDS

Figure 3±20. DO SECTION command syntax

DO		name		AT
SECTION		n	TIMES
Cy	,	Cx
units		units
				;
			EVERY	Ci
REPEAT	HORIZONTALLY			units
AND		VERTICALLY	AT	Ca
				units
				,

Parameters name specifies the name of the section you want to invoke.

n TIMES specifies the number of times you want the section repeated.

Cy specifies the y±axis where you want the section origin located.

Cx specifies the x±axis where you want the section origin located.

units indicates the unit of measure for placement of the section origin. The units are INCHES, CENTIMETERS, DOTS, and XDOTS. You can use two decimal places when you specify inches and centimeters. You must express DOTS and XDOTS in integers.

REPEAT specifies the number of times you want a section repeated in the orientation you specified.

HORIZONTALLY or VERTICALLY specifies the orientation of the lines you want repeated.

EVERY Ci indicates that you want to repeat a section at the increment you have specified.

AT Ca indicates that you want to repeat the section at the absolute coordinate you have specified.

Default	VERTICALLY, if you specified REPEAT.
Examples	Long form:

DO SECTION NUSEC 3 TIMES AT 1,1 AND REPEAT

HORIZONTALLY EVERY 4;

Short form:

DO NUSEC 3 AT 1,1 REPEAT HORIZONTALLY EVERY 4;

HOST FORMS DESCRIPTION LANGUAGE 3.2 FOR IBM MVS CREATING FORMS 3±29