NEC 2400IMX system manual Pri, Ln Pre, Pltn, Plstn

		AKYD: ASSIGNMENT OF KEY DATA FOR DTERM
3. Parameters
TN:	Tenant Number (for My Line)
STN:	Station Number (for My Line)
KYI or KYI2:	1=	Function Key
	2=	Multi-line
KYN or KYN2:	Key number
TP:	Type of Dterm (Enter 2 or 3)
	2= ACD Position (8/16 button + 8 Flex)
	3= ACD Position (24 button + 8 Flex or 16-button with Add on Module + 8 Flex for
		Dterm Series III/32 button type with Add on Module + 8 Flex for Dterm Series E)
PRI:	Priority of Answering a Call (0 ~ 4)
	Must be programmed as 0.
LN PRE:	Line Preference (0/1):
	Must be programmed as 0.
PLTN:	Tenant Number of the Prime Line.		Note 1
PLSTN:	Station Number of the Prime Line.
S:	Off-hook suppression to Prime Line. Note 2
	0= Off-hook suppression disabled.
	1= Off-hook suppression enabled.

Note: “WRT?” prompt is displayed after the function button data have all been assigned.

Note 1: The ACD Line Number must be programmed here (Virtual Line).

Note 2: Must be enabled to Prime Line (ACD Line).

NDA-24282CHAPTER 7

Page 349

Revision 1.0