NEC 2400IMX system manual Acd-Mis

PH-PC22 (EAPI)

SWITCH	SWITCH NO.	SETTING	STANDARD				MEANING
NAME			SETTING
	1	SW01-1	SW01-2		SW01-3		NON-PROTOCOL RS-232C
		SW11-1	SW11-2		SW11-3		PORT DATA SPEED SETTING
		ON	ON		ON		300 bps
		ON	ON		OFF		600 bps
	2	ON	OFF		ON		1200 bps
		ON	OFF		OFF		2400 bps
		OFF	ON		ON		4800 bps
		OFF	ON		OFF		9600 bps
	3
		OFF	OFF		ON		19200 bps
				Sets the non-protocol RS-232C port stop bit
		ON	⋅	length to 1 bit.
	4
				Sets the non-protocol RS-232C port stop bit
SW01		OFF		length to 2 bit.
(for Port 0)
SW11				Sets the non-protocol RS-232C port data length
(for Port 1)		ON	⋅	to 7 bit.
(When using	5
ACD-MIS
				Sets the non-protocol RS-232C port data length
Interface Port)
		OFF		to 8 bit.
	6
		SW01-6	SW01-7			NON-PROTOCOL RS-232C PORT
		SW11-6	SW11-7				PARITY BIT SETTING
		ON	ON		ODD Parity Check
	7	ON	OFF		EVEN Parity Check (standard setting)
		OFF	OFF		No Parity Check is to be made
				Sets the polarity of non-protocol RS-232C PB
		ON		signal to Not Provided.
	8
				Sets the polarity of non-protocol RS-232C PB
		OFF	⋅	signal to +, or sets PB signal to Provided.

CHAPTER 4 NDA-24282

Page 52

Revision 1.0