NEC 2400IMX system manual SW4 SW5

PA-4DATB (DAT)

7.Reference

How to Record a Message

• Prior to your recording, set switches on the DAT card according to the following example.

SWITCH	SETTING	DESCRIPTION
SW1		Timer Value for Channel 0-3: 240 sec.
SW4
SW5		Circuit Card Timer: 60 sec. A-law/∝-law: A-law External Music Source/ An-
		nouncement Equipment: Announcement Equipment
SW6		Single/Repeated Playback: Repeated Playback
MRCS		Channel Designation:
		240 sec mode

SWITCH SETTINGS ON DAT (Example <240 sec mode>)

•Connect a tape recorder to the DAT card with a cable.

DAT

Jack

Front

Tape Recorder

earphone jack (3.6 ø )

•Turn On the MBRQ key to make busy a channel to be recorded.

(To record a message in the 240 sec. mode, all circuits must be placed into MB state.)

•Turn the WR key upwards.

(The corresponding BL lamp lights green indicating the tape recorder has been connected to the cir- cuit.)

•Turn the START key upwards.

(The corresponding BL lamp starts flashing.)

•Start the tape recorder and record your message in the designated channel.

<recording>

•The corresponding BL lamp (BL0 ~ BL7) lights steadily. (Recording ends.)

•Return the START, WR key to the previous position.

NDA-24282 (E)	CHAPTER 4
	Page 153
	Revision 1.0