NEC 2400IMX system manual Acdcom ACD Communications Data, Programming

ACDCOM: ACD COMMUNICATIONS DATA

ACDCOM: ACD Communications Data

1.Function

This command is used to set up the I/O ports that are to be used for the Management Information Service(s) (MIS) and for Infolink.

Communication Data

I/O Ports	Trace Parameters
Type Speed		Update
1	Call Process-
2	ing	Close
3	MIS Errors
		List
4	Trace Destination
5	Buffer	I/O Port
6
	Clock Adjustment
Update Communication?

2.Parameters

I/O Ports:	1 to 6
I/O Type:	MIS-1, MIS-2, MIS-3, MIS-4, MIS-5, Infolink, and OFF
I/O Speed:	4-64 ms (standard assignment = 64)

Trace Parameters:

Call Processing: On/Off

MIS Errors: On/Off (Normally set to “OFF”)

X409 Messages: On/Off

Trace Destination: I/O Port Number (1 to 6) / Buffer (Normally set to “Buffer”)

Clock Adjustment: 1 to 9999 (default 1049)

3.Programming

The type of MIS will determine how the I/O ports are programmed.

•	MIS-1:	not supported
•	MIS-2:	Navigator and Abacus MIS
•	MIS-3 ~ MIS-5:	reserved for future use
•	Infolink:	for Infolink clients (ACD Release 3 and above)

NDA-24282 CHAPTER 7

Page 417

Revision 1.0