NEC 2400IMX system manual Acdws Assignment of ACD Week Schedule, Sun, Mon, Tue, Wed, Thu, Fri, Sat

ACDWS: ASSIGNMENT OF ACD WEEK SCHEDULE

ACDWS: Assignment of ACD Week Schedule

1.Function

This command is used to assign, list, print and remove week schedule data. The ACDWS command is used to program the CCV by which all incoming calls are handled on a 24-hour basis.

Week Schedules
Tenant Number		ACD FPC40		Update
Schedule
				List
			CCV	CCV
Day		Time	Index	Step
1	00.00		0	Close
				0
2	00.00		0	0
3	00.00		0	0
4	00.00		0	0
5	00.00		0	0
6	00.00		0	0
7	00.00		0	0
8	00.00		0	0
9	00.00		0	0
10	00.00		0	0

New Week Schedule

2.Precautions

1.CCVs should be assigned prior to use in week schedules.

2.For allowed number of entry for Week Schedule, see Table 2-1in Chapter 2.

3.The same Schedule Number (SCH) can not be assigned to multiple tenant numbers.

3.Parameters

TENANT NUMBER:	Tenant Number (1 to 10)
SCHEDULE:	Schedule Number (1 to 250)
DAY:	Sun, Mon, Tue, Wed, Thu, Fri, Sat
HOUR:	CCV start time: hour (0-23)
MINUTE:	CCV start time: minute (0-59)
CCV INDEX:	CCV index (1 to 900)
CCV STEP:	CCV step (1 to 20)

CHAPTER 7 NDA-24282

Page 414

Revision 1.0