NEC 2400IMX system manual System Message 26 LAN Interface Error Report NEC ESD July, 1930

SYSTEM MAINTENANCE

3.2.4MESSAGE DETAIL DATA OF SYSTEM MESSAGE “26-V”

face	Error
rt

System Message 26-V: LAN Interface Error Report (OAI/MIS)

This message is output when the PBX software Series 7300 and the ACD software release 2 or the later software are installed.

1. Print-out Format

SYSTEM MESSAGE 26 - V										LAN INTERFACE ERROR REPORT
	NEC - ESD													JULY 25		19:30
			TCP/IP Part									Application Part
1:	xx	xx	xx	xx	xx	xx	xx	xx	2:	xx	xx	xx	00	00	00	00	00
	1	2	3	4	5	6	7	8		9	10	11	12	13	14	15	16

2. Print-out information (typical)

- TCP/IP Part -

1 ~ 4

5 ~ 6

7

8

- Application Part -

9

10

11

IP address of the error-detected OAI/MIS terminal Port No.

Used socket No.

Error Code (TCP/IP part)

Application Type 05=OAI 07=MIS

Faulty Logical Port No. Error Kind (ERR) 01=SEND Execution Error 02=RECEIVE Execution Error 03=TCP/IP Connection Error

04=Connection Error (B-level Infinite Loop, etc.) 05=TCP/IP Port Capacity Over

NDA-24282 (E)	CHAPTER 9
	Page 447
	Revision 1.0