NEC 2400IMX system manual System Operations Work Mode

SYSTEM OPERATIONS

2.3WORK MODE

(a)Work mode manual setting

Use the following procedure to enter Work mode when the contents of the ACD call requires it.

START

Press the WORK key during communication with an ACD call.

The lamp lights up and WORK PENDING is displayed.

Press the RELEASE key.

WORK MODE is displayed, indicating the Work mode.

(End of work)

Press the WORK key.

The lamp goes off and READY is displayed.

Work mode ends, and the position becomes available for receiving the next ACD call.

END

(b)Work mode automatic setting

Use the following procedure if it is required to activate theWork mode automatically after every ACD call.

START

Press the RELEASE key during communication with an ACD call.

An incoming ACD call is completed.

WORK MODE is displayed, indicating the Work mode.

(End of work)

Press the WORK key.

The lamp goes off and READY is displayed.

Work mode ends, and the position becomes available for receiving the next ACD call.

END

NDA-24282CHAPTER 8

Page 429

Revision 1.0