NEC 2400IMX system manual Algsn Assignment of Telephone Station Data for NDM

ALGSN: Assignment of Telephone Station Data for NDM

ALGSN: Assignment of Telephone Station Data for NDM

1.General

This command assigns the related data of the Telephone Number (TELN) corresponding to the physical station. The data assigned by this command is written in Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN).

2.Precautions

1.The ALGSN command is used to assign the Telephone Number (TELN) for a Network Control Node (NCN).

2.The TYPE parameter allows the user to choose the programming method of the physical station. TYPE = 1 (LENS): Telephone number to be given to the LENS

TYPE = 2 (STN): Telephone number to be given to the station

3.The system data assignment (ASYDN, SYS 1, INDEX 514, bit1 = 1) is needed to provide the Network Data Memory (NDM).

4.When the parameter TYPE is “1” (LENS is used to specify the physical station number), the assignment of the Fusion Point Code (FPC) entered by the AFMU command is required.

5.For more details, see the NEAX2400 IMX Fusion Network System Manual.

6.All PBX and ACD Station Numbers must be added here for Fusion Network.

CHAPTER 7	NDA-24282 (E)
Page 372
Revision 1.0