NEC 2400IMX system manual BL4, BL7, Through No, BL3, State or is not assigned in the system

PA-4DATA (4DAT)

4.Lamp Indications

The contents of lamp indications of this circuit card are shown in the table below.

LAMP NAME	COLOR	STATE
OPE	Green	Remains lit while this circuit card is operating.
N-OPE	Red	Remains lit while this circuit card is in make-busy state.
BL4	Green	Lights when the corresponding circuit (circuits No. 0 through No. 3) is busy.
~	Flash	Flashes while message recording is in progress on the correspond-circuit (circuits No.
BL7
		0 through No. 3).
BL0	Red	Lights when the corresponding circuit (circuits No. 0 through No. 3) is busy.
~
	Flash	Flashes when the corresponding circuit (circuits No. 0 through No. 3) is in make-busy
BL3
		state or is not assigned in the system.

NDA-24282 (E)	CHAPTER 4
	Page 137
	Revision 1.0