NEC 2400IMX Asfc Assignment of Service Feature Restriction Class Data, Day/Night, Sfi

ASFC: ASSIGNMENT OF SERVICE FEATURE RESTRICTION CLASS DATA

ASFC: Assignment of Service Feature Restriction Class Data

1.Function

This command is used to assign and display Service Feature Restriction information according to the Service Feature Restriction Class (SFC) of the Station.

2.Precautions

1.For the SFC of ACD line of an agent position, be sure to assign RES = 1 (A Direct call is restricted) for SFI = 95 (Direct Call Restriction). Assign RES = 0 (A Direct call is allowed) for SFC of non-ACD-lines

2.For details of SFIs other than SFI = 95, refer to “ASFC” command table in NEAX2400 IMX Office Data Specification

3.Service Feature Restriction Class data programmed in this command must be set to all nodes to be provided ACD trunk for Fusion network.

3.Parameters

DAY/NIGHT:	Day/Night Mode
	D=	Day Mode
	N=	Night Mode
TN:	Tenant Number
SFC:	Service Restriction Class (0 ~ 15)
SFI:	Service Feature Index (1 ~ 255) (Enter 95.)
	95=	1 Direct Call Restriction (for ACD)
	118=	Live Record (for AD-16/40 vm)
RES:	Restriction Data
	0=	Restricted
	1=	Allowed

Note: When WRT? = Y is entered the value of the SFC automatically increases by one.

CHAPTER 7 NDA-24282

Page 346

Revision 1.0