Panasonic MC-UL427 Edge Cleaning, Automatic Adjusting Nozzle, Thermal Protector

Models: MC-UL427

1 64
Download 64 pages 3.23 Kb
Page 30
Image 30
Edge Cleaning

Edge Cleaning

This model is equipped with an edge cleaning feature for cleaning carpet edges near baseboards and stationary furniture.

Automatic Adjusting Nozzle

Pivot Point

Point d’articulation

Botón de liberación

Nozzle

Tête

d'aspiration Boquilla

Deep Pile Carpet

Shallow Pile Carpet

Moquette à poils longs

Moquette à poils courts

Alfombra de pelo largo

Alfombra de pelo corto

The nozzle of your Panasonic vacuum cleaner automatically adjusts to any carpet pile height.

Feature allows nozzle to float evenly over carpet pile surfaces.

No manual adjustments required.

Thermal Protector

This vacuum cleaner has a thermal protector which automatically trips to protect the vacuum cleaner from overheating.

If a clog prevents the normal flow of air to the motor, the thermal protector turns the motor off automatically. This allows the motor to cool in order to prevent possible damage to the vacuum cleaner.

TO CORRECT PROBLEM:

Turn the vacuum cleaner off and unplug the power cord from the outlet to allow the vacuum cleaner to cool and the thermal protector to reset.

Check for and remove clogs, if necessary (See REMOVING CLOGS p. 50, 52). Also check and replace any clogged filters and empty dust bin, if necessary.

Wait approximately fifty (50) minutes and then plug the vacuum cleaner in and turn back on to see if the motor protector has reset.

- 30 -

Page 30
Image 30
Panasonic MC-UL427 operating instructions Edge Cleaning, Automatic Adjusting Nozzle, Thermal Protector