Body Release

Body Release

Your vacuum cleaner is equipped with three (3) position body release;

• Upright position (locked)

• Middle position (normal use)

• Low position (under furniture)

Release the body by pressing down on the body release pedal with your foot and pulling back and down on the handle with your hand.

Move the vacuum cleaner to upright position for storage and tool use.

➢ Your vacuum cleaner is equipped with three (3) position body release;CAUTION

DO NOT press the handle quick release button when the vacuum cleaner is in use.

Carpet/Bare Floor Selector

Carpet/Bare Floor Selector

Sélecteur

tapis/plancher Control para alfombra/ sin alfombra

Selector should be placed in BARE FLOOR (TOOLS) position when using vacuum cleaner on bare floors and when using tools. The agitator does not rotate in the BARE FLOOR (TOOLS) position.

Selector should be placed in CARPET position when using vacuum cleaner on carpeted floors.

NOTE: For longer belt life, turn vacuum cleaner off before moving selector.

Otherwise, take care when selecting either position to ensure selector is pushed as fully and quickly as possible to desired position.

Failure to do so can cause belt to rub on selector shaft and result in belt becoming hot and creating a burning rubber smell.

- 28 -

Page 28
Image 28
Panasonic MC-UL910 operating instructions Body Release, Carpet/Bare Floor Selector