Removing Clogs
If the vacuum cleaner does not seem to have adequate suction, first check if the dust bin is full or if a filter is clogged.
➢Check the handle and extension wand area.
➢Remove handle by pressing handle quick release button.
➢Visually inspect the hose and the base area into which the hose is connected.
➢Remove any visible clogs.
➢Plug in the vacuum cleaner and turn it on.
➢Stretch the hose to maximum length and then allow the hose to return to its storage length.
➢Turn off and unplug the vacuum cleaner.
➢Remove lower plate. See: “Removing and Installing Lower Plate”
➢Inspect inlet of nozzle hose and clear
any obstructions.
➢ Remove dust bin and check for clogs.
Hose Inlet |
Entrée du tuyau |
Conección de |
manguera |
➢If the dust bin and filter areas and the hose areas are free of clogs, check the nozzle area.
➢Return the vacuum cleaner to the upright position before plugging into an electrical outlet.
- 56 -