Panasonic MC-UL910 To assemble dust bin, Press into place. A noticeable “click” should be heard

To assemble dust bin:

➢Reinstall upper portion of dust bin onto air guide so that the locking screws pass through the holes in the upper portion.

➢Using alignment marks on the fastener ring and dust bin, place fastener ring onto dust bin and rotate to lock in place.

➢Place the dust bin lid on the upper portion of the dust bin using alignment slots, and rotate until the lid locks in place.

➢Reinstall pre-filter by using the alignment ribs on the pre-filter to align with the ribs on the upper portion of the dust bin.

➢Press into place. A noticeable “click” should be heard.

➢Reinstall lower portion of the dust bin by aligning ribs on the upper portion with the UNLOCK ribs on the lower portion.

➢Rotate until ribs from the upper portion of the dust bin align with the LOCK ribs.

NOTE: If lower portion of dust bin does not fit properly check pre-filter installation.

- 40 -