Basic Operations
1918
DATE/TIME
C.DISPLAY COUNTER MEMORY
TIMECODE
RETURN ---- YES
OFF TIME DATE
C.RESET ---- YES
DISPLAY
LCD/EVF SET ---- YES
LCD MODE NORMAL BRIGHT
DISPLAY SETUP
PRESS MENU TO EXIT
ALL PARTIAL OFF
DISPLAY SETUP
PRESS MENU TO EXIT
REMOTE
REC LAMP OFF ON
RETURN ---- YES
VCR1 VCR2 OFF
BEEP SOUND OFF ON
SHTR EFFECT OFF ON
SELFSHOOT NORMAL MIRROR
CLOCK SET ---- YES
OTHER FUNCTIONS
PRESS MENU TO EXIT
RETURN ---- YES
OTHER FUNCTIONS
PRESS MENU TO EXIT
DEMO MODE
RETURN ---- YES
OFF ON
DEMO MODE
PRESS MENU TO EXIT
DEMO MODE
PRESS MENU TO EXIT
?
>
@
A
BH
G
F
E
D
C
=
I
56
7
[DIGITAL EFFECT] Sub-Menu
5Digital Effects 1 [EFFECT1] (p. 48)
6Digital Effects 2 [EFFECT2] (p. 48)
[CARD SETUP] Sub-Menu !(NV-DS25 only)
7Picture Quality [PICTURE QUALITY] (p. 69)
[RECORDING SETUP] Sub-Menu "
8Recording Speed Mode [REC SPEED] (p. 13)
9Audio Recording Mode [AUDIO REC] (p. 64)
:Scene Index Mode [SCENEINDEX] (p. 42)
;Wind Noise Reduction [WIND CUT]
If you set [WIND CUT] to [ON], the noise of the
wind hitting the Microphone is reduced.
However, this also causes a slight deterioration
of the sound reproduction in the bass range.
<Zoom Microphone [ZOOM MIC] (p. 31)
FShutter Effect [SHTR EFFECT] (p. 31)
GDate and Time Setting [CLOCK SET] (p. 23)
HSelf-Recording [SELFSHOOT] (p. 29)
(NV-DS15, NV-DS150, NV-DS25 only)
[DEMO MODE] Sub-Menu %
IDemonstration Mode [DEMO MODE]
If you connect the AC Adaptor to the Movie
Camera, set the [OFF/ON] Switch to [ON]
without any cassette inserted, and leave it on
for approximately 10 minutes without
performing any operation, the Movie Camera
automatically switches over to the
Demonstration Mode to show its functions.
Pressing a button or performing some other
operation suspends the Demonstration Mode.
Leaving the Movie Camera again on for more
than 10 minutes without operating it, causes the
demonstration to start again.
Also, when you set [DEMO MODE] to [ON] and
then exit the menu, the demonstration starts.
To cancel the Demonstration Mode, insert a
cassette or set [DEMO MODE] to [OFF].
Menu Functions
Camera Functions Menu
D.ZOOM
CINEMA
40 400
OFF ON
RETURN ---- YES
M.SENSOR OFF ON
CAMERA SETUP
PRESS MENU TO EXIT
REC SPEED
AUDIO REC 12bit 16bit
RETURN ---- YES
SP LP
SCENEINDEX 2HOUR DAY
WIND CUT OFF ON
ZOOM MIC OFF ON
RETURN ---- YES
RECORDING SETUP
PRESS MENU TO EXIT
CARD SETUP
PRESS MENU TO EXIT
PICTURE QUALITY
FINE NORMAL ECONOMY
RETURN ---- YES
1
2
4
3
7
5
6
8
9
:
;
<
1
3
2
4
ZOOM WIPE MIX
STROBE GAINUP
TRACER MOSAIC
MIRROR
EFFECT1
B/W SOLARI
OFF [&ZOOM [
EFFECT2 OFF NEGA SEPIA
DIGITAL EFFECT
PRESS MENU TO EXIT
The illustrations of the menus are intended for
explaining the functions; the actual menus look
somewhat different.
Camera Mode Main-Menu [CAMERA FUNCTIONS]
1. CAMERA SETUP
2. DIGITAL EFFECT
3. CARD SETUP (NV-DS25 only)
4. RECORDING SETUP
5. DISPLAY SETUP
6. OTHER FUNCTIONS
7. DEMO MODE
[CAMERA SETUP] Sub-Menu
1Digital Zoom [D.ZOOM] (p. 31)
2Cinema-like Format Recording [CINEMA]
(p. 32)
3Motion-Sensor-Controlled Recording
[M.SENSOR] (p. 52, 54)
4Returning to the Main-Menu [RETURN]
If you set [RETURN] to [YES], the Menu
changes back to the Main-Menu.
[DISPLAY SETUP] Sub-Menu #
=Date and Time Indication [DATE/TIME]
(p. 35)
>Counter Display Mode [C.DISPLAY] (p. 99)
?Counter Reset [C.RESET] (p. 97)
To reset the counter to zero.
However, the Time Code cannot be reset.
@Display Mode [DISPLAY] (P. 99)
ALCD Lighting Mode [LCD MODE] (p. 22)
(NV-DS15, NV-DS150, NV-DS25 only)
BLCD and Viewfinder Adjustment [LCD/EVF
SET] (p. 22)
(LCD Monitor adjustment is only for models NV-
DS15, NV-DS150 and NV-DS25.)
[OTHER FUNCTIONS] Sub-Menu $
CRemote Controller Mode [REMOTE] (p. 83)
DRecording Lamp [REC LAMP] (p. 25)
EBeep Sound [BEEP SOUND]
(NV-DS15, NV-DS150, NV-DS25 only)
If you set [BEEP SOUND] to [ON], a
confirmation/alarm beep sound is emitted in the
following cases:
1 Beep
³When you start recording
³When you switch the [OFF/ON] Switch from
[OFF] to [ON]
2 Beeps
³When you pause recording
10 Beeps
³When you operate the Movie Camera in an
inappropriate way before or during recording