Panasonic NV-DS15 Viewing the Just Recorded Scenes on the Movie Camera, Want to Play Back

CARD MULTI S j SEARCH i FADE STILL BLC

6 5 ∫ ; 1

PROGRAMME AE

FOCUS AUTO
	MNL
	MODE
	SELECT
MENU	W.B/SHUTTER/IRIS
	PUSH	1
	MF/VOL/JOG

2

CAMERA

VCR

CARD

P.B

MODE

Search Lock Function

For longer Cue or Review Playback, press the Cue Button [5] or the Review Button [6] only briefly. As this locks the search function, you do not need to keep the button pressed for a long time.

³To resume normal playback, press the Play Button [1].

³In Cue and Review Playback, pictures with fast- moving subjects may contain mosaic-like patterns.

Hyper Check Function

³If you press the Fast-forward Button [5] during fast-forwarding of the tape or the Rewind Button [6] during rewinding of the tape, Cue Playback or Review Playback continues for as long as you keep the Button pressed.

³At the beginning and end of Cue Playback or Review Playback, some momentary picture distortion may occur.

Making the Date/Time Indication Appear

This Movie Camera automatically records the date and time, however not directly in the picture but as part of the sub code (p. 96).

To make the Date/Time Indication appear, set [DATE/ TIME] on the [DISPLAY SETUP] Sub-Menu to the desired setting. It is also possible to make the Date/Time Indication appear and change it by repeatedly pressing the [DATE/TIME] Button on the Remote Controller. (p. 81)

12:00:00

15.10.2000

15.10.2000

Basic Operations

Title Procedure

Viewing the Just Recorded	1	2
Scenes on the Movie Camera
(Playback)	Press the [MODE]	Press the Rewind
	Button until the [VCR]	Button [6] to rewind
You can play back recorded scenes right after	Lamp lights.	the tape.
		³Rewind the tape to the
recording.
		point where the
		recording started.
		³If the tape reaches the
	CAMERA	beginning during
		rewinding, it
	VCR
		automatically stops.
	CARD
	P.B
		S j SEARCH i
		6	5
	MODE

3	4
Press the Play Button	To stop playback:
[1] to start playback.	Press the Stop Button
	[º].
BLC	FADE
1	∫

!

Remarks, etc.

´Adjusting the Volume

Keep the [PUSH] Dial ￿ pressed until the [VOLUME] Indication appears. Then, turn the [PUSH] Dial to adjust the volume. After adjusting, press the [PUSH] Dial to make the [VOLUME] Indication disappear.

To adjust the volume with the Remote Controller, press the [T] or [W] Button to make the [VOLUME] Indication appear. You can then increase the volume by pressing the [T] Button or decrease it by pressing the [W] Button. A few seconds after finishing the adjustment, the [VOLUME] Indication disappears.

³The output volume from the built-in speaker¡ and [PHONES] socket is adjusted.

¡built-in speaker: NV-DS15, NV-DS150, NV-DS25 only

³When using the Playback Zoom Function, it is not possible to adjust the sound volume.

³If a cassette recorded with copyright protection signal is played back, the screen becomes black.

Searching for a Scene That You	Cue Playback		Review Playback
	Keep the Cue Button		Keep the Review Button
Want to Play Back
	[5] pressed during		[6] pressed during
	playback.		playback.
	S j SEARCH i		S j SEARCH i
	6	5	6	5

Variable Speed Search
Function
It is possible to change
the speed of Cue
Playback or Review
Playback.	2 Turn the [PUSH]
1 Press the Play
Button [1] during	Dial to select the
playback.	desired search
	speed.
BLC

Returning to Normal Playback

Press the Play Button [1].

Playback continues at normal speed.

³The Variable Speed Search Function offers the following 6 different playback speeds both in forward and reverse directions: 1/5k (slow playback in SP Mode only), 1/3k (slow playback in LP Mode only), 1k, 2k, 5k, 10k, 20k

%

34

&

1

W.B/SHUTTER/IRIS

PUSH

10k%

MF/VOL/JOG

BLC

1

³During Variable Speed Search, mosaic-like patterns appear in the picture.

³When using the Variable Speed Search Function, the sound is muted.

35