Panasonic NV-FJ730 Editing, Audio Dubbing, AV2 Audio, That you can hear the sound, Hints

		Editing			Preparations
					– Connect the audio equipment or a video movie camera to
					this VCR with an audio cable.
Audio Dubbing					– Display the VCR picture on the TV.
					– Insert the cassette on which the audio dubbing is to be
The audio dubbing function lets you record new sound onto					performed, and make sure that its erasure prevention tab is
the normal (mono) audio track. Although this erases the					not broken out.
original sound on the normal audio track, the sound on the					– Select the audio source required by pressing the INPUT
Hi-Fi audio tracks remains unchanged. Use this function to					SELECT button O to set A1 or A2.
add narration or background music to a previously made
recordings.					A1:	When connected to the AV1(AUDIO IN)
						sockets.
		AV2 (AUDIO IN ])	AV1 (AUDIO IN d)		A2:	When connected to the AV2 (AUDIO IN)
						sockets on front panel.
					– Use the L and R connectors for operations in the normal
					(monaural) mode.
POWER	SERCH PICTURE MODE TAPE RIFRESH			I N	Operations
AV2 IN	VIDEO L AUDIO R	PAUSE/STILL A.DUB			1 Press the Play button 7 on this VCR to start playback to
				OUT	search for the point from which you want to start audio
		IN (AV1)	OUT	RF	dubbing.

Audio equipment or Video movie camera

2At the point from which you want to perform audio dubbing, press the PAUSE/STILL button ^ on this VCR to put it in the still playback mode.

3Press the A.DUB button _ on this VCR to put it in the recording pause mode.

On Screen Display

4Start playback on the source unit so

A2	0:00.22
that you can hear the sound.	SP
	A. DUB

1 2

5 When you reach the point from which you want to start audio dubbing, press the PAUSE/STILL button ^ on this VCR again to start recording the new sound or start your narration.

A2	0:00.22
	SP
L R	A. DUB

3		6 At the point where you want to stop audio dubbing, press
	A.DUB	the Stop button F to finish recording.

5 A.DUB 6

Hints:

–The new sound is recorded on the normal audio track. The original sound remains on the Hi-Fi audio tracks.

The sound recorded on the normal audio track is always in mono.

– For audio dubbing with narration, you can use the built-in microphone of the connected video movie camera.

– To listen to the sound recorded with audio dubbing, press the AUDIO button ? during playback to select the normal audio track. (For details, refer to page 12.)

–To listen to the sound recorded with audio dubbing together with the original sound, first set [AUDIO MIX] to [ON] (for details, refer to page 13).

26