Panasonic NV-FJ735AM Timer Recording from an External Signal Source, Checking a Timer Programme

Timer Recording from an External Signal Source

If timer recording is performed by a unit connected to the Audio/Video input sockets, select the A1 or A2 indicator in step 3 of 4-Key Programming for the programme position.

Checking a Timer Programme

–The VCR must be turned on, or in timer recording standby mode.

–Confirm that the TV is on and the VCR viewing channel is selected.

–If the [DIRECT REC] is set to [ON], A1 is skipped.

DATE	CH	ON	OFF
27SA	A 2	– – : – –	– – : – – SP

CATEGORY : 1

Setting other Programmes in Succession

Repeat steps 1–9 of 4-Key Programming.

Programming a Timer Recording of a TV Programme Until its End

(Tape Speed Auto Change Function )

1Press the PROG./CHECK button < twice.

–Every time you press the PROG./ CHECK button <, the programme shifts below.

2Press the Cursor button (1) S to display the Category. (When [JET NAVIGATOR] is set to [ON].) Press the Cursor button (1) S again to make the previous display appear.

3Press the MENU button U to exit the On Screen Display.

	DATE	CH	ON	OFF
1	27WE	2	20:02	21:30	SP
2	SU - SA 25 10:30			11:00	A
3	SU	14	15:00	16:00	SP
4	19TU	5	22:15	23:30	EP
5	28TH	A2	20:02	21:30	SP
6	30SA	4	19:10	19:55	EP
7	– – – – – – – –:– –			– –:– –
8	– – – – – – – –:– –			– –:– –
			END:MENU
	DATE	CH	ON	OFF
1	27WE	2	20:02	21:30
2	SU - SA	25	10:30	11:00
3	SU	14	15:00	16:00
4	19TU	5	22:15	23:30
5	28TH	A2	20:02	21:30
6	30SA	4	19:10	19:55
7	– – – – – –		– –:– –	– –:– –
8	– – – – – –		– –:– –	– –:– –

END:MENU

If the VCR determines that the remaining tape time is insufficient to record the programme to its end during a timer recording performed in the SP mode, this function automatically changes the tape speed to ensure that the whole programme will be recorded.

Cancelling a Timer Programme

–The VCR must be turned on, or in timer recording standby mode.

–Confirm that the TV is on and the VCR viewing channel is selected.

The tape speed will change as follows.

PAL system: SP ) LP

NTSC system: SP ) EP

–This function cannot change the recording speed to the EP mode for PAL system.

Depending on the remaining tape length, recording may be performed in the LP (EP) mode from the start. However, if the remaining tape time is still not sufficient in this case, the programme cannot be recorded to the end.

–The tape length must be set correctly. (See page 13.)

–Some tapes may not work correctly.

–If the recording speed changes from SP to LP during a timer recording, some brief picture distortion occurs at that point.

To Activate the Tape Speed Auto Change Function:

1Press the PROG./CHECK button < twice.

2Press the PROG./CHECK button < repeatedly until the desired timer programme is highlighted.

3Press the CANCEL button ;.

4Press the MENU button U to exit the On Screen Display.

	DATE	CH		ON	OFF
1 27WE		2	20:02		21:30	SP
2 SU - SA 25			10:30		11:00	A
3 SU		14	15:00		16:00	SP
4 19TU		5	22:15		23:30	EP
5 28TH		A2	20:02		21:30	SP
6 30SA		4	19:10		19:55	EP
7 – – – – – – – –:– – – –:– –
8 – – – – – – – –:– – – –:– –
				END:MENU
	DATE	CH		ON	OFF
1	27WE	2	20:02		21:30	SP
2	SU - SA 25		10:30		11:00	A
3	SU	14	15:00		16:00	SP
4	19TU	5	22:15		23:30	EP
5	28TH	A2	20:02		21:30	SP
6	30SA	4	19:10		19:55	EP
7	– – – – – –			– –:– –	– –:– –
8	– – – – – –			– –:– –	– –:– –
				END:MENU
	DATE	CH		ON	OFF
1	27WE	2	20:02		21:30	SP
2	SU - SA 25		10:30		11:00	A
3	SU	14	15:00		16:00	SP
4	– – – – – –			– –:– –	– –:– –	EP
5	28TH	A2	20:02		21:30	SP
6	30SA	4	19:10		19:55	EP
7	– – – – – –			– –:– –	– –:– –
8	– – – – – –			– –:– –	– –:– –

END:MENU

Press the SPEED button B to select [A].

DATE	CH ON	OFF
27SA	2 2 0 : 0 2	2 1 :	3 0 A

CATEGORY : 1

–Every time you press the SPEED button B, the indication changes in the following order:

SP LP EP

PAL system:

A

SP EP

NTSC system:

A

Note:

–If timer recording is not completed (due to insufficient tape or cancellation by the user), the programmed timer recording data will be cancelled from the memory by

4 A.M two days later.

However, if the timer recording function is activated at that time, the programmed timer recording data will not be cancelled.

21