Chapter 5. Menu
System ▼
78
2nd | 3rd | Description |
| ||||
|
|
|
|
|
|
| |
Time |
| You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off at a | |||||
|
| specified time using the Timer function. |
| ||||
|
| • Press the |
| button if you want to view the current time. | |||
|
| INFO | |||||
| Clock Set | Select Clock Set. Select Date or Time, and then press |
| . |
| ||
|
|
| |||||
|
| Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and right arrow | |||||
|
| buttons to move from one entry field to the next. Press | when done. |
•You can set the Date and Time directly by pressing the number buttons on the remote control.
DST | Switches the DST (Daylight Saving Time) function on or off. |
|
Sleep Timer | Automatically shuts off the product after a preset period of time. |
|
| • Use the up and down arrows to select a period of time, and then press | . To cancel Sleep Timer, select Off. |
Power On Delay | When connecting multiple products, adjust the | |
| the range |
|
Auto Source Switching | Turning on the display with Auto Source Switching On, and the previous video source selection is not active, the | |
| display will automatically search the different video input sources for active video. | |
Auto Source Switching | When the Auto Source Switching is On, the display video source will automatically be searched for active video. | |
| The Primary Source selection will be activated, if the current video source is not recognized. | |
| Secondary Source selection will become active, if no primary video source is available. | |
| If both the primary and secondary input sources are not recognized, the display will perform two searches for an | |
| active source, each search checking the primary and then secondary source. If both searches fail, the display will | |
| return to the first video source and display a message indicating that there is no signal. | |
| When the Primary Source selection is set to All, the display will search all the video source inputs twice in sequence | |
| looking for an active video source, returning back to the first video source in the sequence if no video is found. | |
Primary Source Recovery | Select whether to restore the selected primary input source when a primary input source is connected. | |
| • The Primary Source Recovery function is disabled if Primary Source is set to All. | |
Primary Source | Specify Primary Source for the automatic input source. |
|