Chapter 1. Safety

Cleaning

Exercise care when cleaning as the panel and exterior of advanced mirror glass are easily scratched.

Take the following steps when cleaning.

1Power off the product and computer.

2Disconnect the power cord from the product.

‒Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result.

3Wet a soft and dry cloth in water and wring thoroughly.

‒Do not use detergents that contain alcohol, solvent or surface-active agents.

‒Do not spray water or detergent directly on the product.

4Wipe the product with a clean, soft and dry cloth.

5Connect the power cord to the product when cleaning is finished.

6Power on the product and computer.

Cleaning the mirror glass

Usable cleaning cloth

• Superfine fibers (Provided accessory: CLOTH-

(Material)

CLEAN(BN63-01798B))

 

 

• 100% cotton

 

Cleaning solution

Water

None

Cleaning method

Clean with wet cloth first

Wipe with dry cloth

 

and then wipe with dry

 

 

cloth

 

Status after cleaning

All fingerprints and stains are gone

Deformation or

No

No

alteration of the glass

 

 

 

 

 

9

Precautions when handling the panel

Do not stand the product upright on the floor. The panel is fragile and can get damaged.

Lay the product down to handle it (the packaging can be used). Ensure you use the handles on the back when moving the product.

Do not hold or grasp any area of the product within 15 mm from the front.