Chapter 5. Menu

Auto Turn Off

Setting an Anynet+ Device to turn Off automatically when the product is turned off.

•If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the product powers off.

•May not be enabled depending on the device.

Search for Devices

Switching between Anynet+ devices

1Press the TOOLS button, select Anynet+ (HDMI-CEC), and then press .

2Select Select Device, and then press the button.

If you cannot find a device you want, select Refresh to refresh the list.

3Select a device, and then press the button. You can switch to the selected device.

•The Select Device menu appears only when you set Anynet+ (HDMI-CEC)to On in the System menu.

•Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while switching is in progress.

•If you have selected an Anynet+ device by pressing the SOURCE button and then selecting its input source, you cannot use the Anynet+ function.

•Make sure to switch to an Anynet+ device by using the Select Device.

83

Troubleshooting forAnynet+

Problem

Possible Solution

Anynet+ does not

• Check if the device is an Anynet+ device. The Anynet+

work.

system supports Anynet+ devices only.

 

• Check if the Anynet+ device power cord is properly

 

connected.

 

• Check the Anynet+ device’s Video/Audio/HDMI cable

 

connections.

 

• Check whether Anynet+ (HDMI-CEC)is set to On in the

 

System menu.

 

• Check whether the remote control is Anynet+

 

compatible.

 

• Anynet+ doesn’t work in certain situations. (initial

 

setup)

 

• If you have removed and then reconnected the HDMI

 

cable, please make sure to search devices again or turn

 

your

 

• product off and on again.

 

• Check if the Anynet+ function of the Anynet device is

 

set on.

 

 

 

 

I want to start

• Check if the Anynet+ device is properly connected to

Anynet+.

the product and check if the Anynet+ (HDMI-CEC)is set

 

to On in the System menu.

 

• Press the

 

button to display the Anynet+ menu

 

TOOLS

 

and select a menu you want.

I want to exit Anynet+. • Select View PC in the Anynet+ menu.

•Press the SOURCE button on the product remote control and select a non- Anynet+ device.