Chapter 2. Device setup
External sensor kit (sold separately)
The external sensor kit is integrated with the remote control sensor and power indicator. If mounting the display onto a wall, you can move the External sensor kit to the side of the display.
The colour and shape of parts may differ from what is shown.
IR IN 1 
2
15
•Remove batteries when the remote control is not to be used for an extended period of time.
•If you disconnect the power cord from the product while it is in standby mode, the product remains in standby mode until it runs out of power. The power indicator turns on or blinks during this time. If you reconnect the power cord, the input source activates and the product resumes normal operation.
Description
Aim the remote control towards this spot.
•Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
2 | Power | The power indicatorwill turn off when the product is |
| indicator | turned on. It will blink in power saving mode. |
|
|
|
Use the remote control within 7 m to 10 m from the sensor on the product at an angle of 30° from the left and right.
•Store used batteries out of reach of children and recycle.
•Do not use a new and used battery together. Replace both batteries at the same time.