Record mode
Check the recording
The last image recorded is played back for 2 to
3 seconds. After checking, the camera will be set to a recording pause.
≥Set to Tape Recording Mode.
1Press the joystick during the recording pause until the icon 1 appears.
2Move the joystick down to select the recording check icon [
].
1
Blank search function
Searches for the last part of the image recorded (unused part of the tape).
≥Set to Tape Recording/Playback Mode.
1Set [BASIC] or [ADVANCE] >> [BLANK SEARCH] >> [YES].
ªStopping blank search midway
through
Move the joystick down.
≥If the cassette tape has no blank part, then the camera will stop at the end of the tape.
≥The camera stops at a point approx. 1 second before the end of the last image recorded. When you start recording at that point, the image can be recorded seamlessly from the last image.
Recording still pictures onto a card (Photoshot)
≥Set to Card Recording Mode.
1Press the [PHOTO SHOT] button halfway in order to adjust focusing. (For auto focusing only)
≥If you set [OIS] to [ON], then the image stabilizer function will be more effective.
(MEGA OIS will be indicated.)
≥The iris/gain value is fixed and this camera focuses on the subject automatically.
PHOTO
SHOT
1
2
1Shutter chance mark
± (The white lamp flashes.): Focusing
¥ (The green lamp lights up.): When in focus
No mark: When focusing is unsuccessful ≥The shutter chance mark is indicated as follows when the [PHOTO SHOT] button is not pressed halfway. Please use it as a guide for recording.
¥(The green lamp lights up.):
When in focus and a good picture can be recorded
±(White lamp lights up.): Almost in focus
2Focus area
2Press the [PHOTO SHOT] button fully.
ªTo record still pictures clearly
≥When zooming in on the subject with a magnification of 4k to 10k or higher, it is difficult to reduce the slight shaking from holding the movie camera by hand. We recommend decreasing the zoom magnification and approaching the subject when recording.
≥When recording still pictures, hold the movie camera firmly with your hands and keep your arms stationary at your side so as not to shake the movie camera.
≥You can record stable pictures without shaking by using a tripod and the remote control.
21
VQT0N73
