Panasonic NV-GS250GN operating instructions Recording the contents of other equipment

Edit mode

≥For more information, refer to the operating instructions for your TV set and recorder.

≥When you do not need functional indications or date and time indications, press the [OSD] button on the remote control for no indication. (When you connect the movie camera and a recorder with the DV cable, these indications may not appear.)

ªWhen neither image nor sound from the movie camera is output to the TV

set

≥Check that the plugs are inserted as far as they go.

≥Check the connected terminal.

≥When no image is presented on the TV even if set [BASIC] >> [AV JACK] >> [OUT/Ë], set to [OUT]. (-47-)

Recording the contents of other equipment

You can dub the contents of other equipment to a DV cassette or card, and can record TV programs.

≥Set to Tape Playback Mode.

1Connect the movie camera and other equipment.

AV/ [VIDEO OUT] [S-VIDEO OUT]

[AUDIO OUT]

1 2

S-VIDEO

≥Connect the movie camera and other equipment by using the AV cable 1.

≥If the recorder has an S-Video terminal, then also connect an S-Video cable 2 (optional). It

allows you to record clearer image.

2Set [BASIC] >> [AV JACK] >> [IN/OUT]. (Movie camera)

3Set [ADVANCE] >> [REC STDBY] >> [YES]. (Movie camera)(Only when the Tape Recording Mode)

≥The icon appears.

4Turn the power on and start playback. (Other equipment)

5Start recording. (Movie camera)

40

Recording on a tape:

Move the joystick up to start recording.

Or, while pressing the [¥REC] button on the remote controller, press the [1] button.

¥REC A.DUB

V/REW PLAY FF/W

W

STILL ADV PAUSE STILL ADV VOL

STOP

Recording on a card:

Press the [PHOTO SHOT] button.

6Move the joystick of the movie camera down or press the [∫] button on the remote controller to stop recording.

≥While analog input pictures are being recorded on a tape or when the movie camera is in recording standby mode, the photoshot recording is disabled.

7Stop playback. (Other equipment)

≥Do not plug or unplug the cable during recording or the recording may not be completed properly.

≥Carefully read the operating instructions for your

TV set and video equipment.

≥By operating as [SETUP] or [ADVANCE] >> [AUDIO REC], set the recording sound mode ([12bit] or [16bit]).

≥If a picture (bilingual video, etc.) containing main sound and sub sound has been dubbed, select the desired sound by [SETUP] >> [AUDIO OUT] on playback.

≥If a picture containing a copyright protection signal (copy guard) is recorded, the message “COPY PROTECTED” appears when recording it on a tape and the picture is distorted by

mosaic-like patterns at playback.

≥When wide images are input, the display such as the menu screen or the operation icon is expanded horizontally.

≥If, during recording, an operation such as cue playback or slow motion playback is performed on external equipment, mosaic-like patterns may appear on the picture at playback.

≥If pictures are recorded when TV broadcasting signals are weak or pictures are affected by noise, they may be distorted or may not even be played back.

≥If both the S-Video cable and the AV cable are connected, S -Video signal are input preferentially.

VQT0N73