Playback mode

Playback mode

Playing back tape

Set to Tape Playback Mode.

1Operate with joystick.

1/;: Playback/Pause

6: Rewind/Review playback (Reverts to playback with the 1/; icon.)

5: Fast forward/Cue playback (Reverts to playback with the 1/; icon.)

: Stop

During cue/review playback, fast-moving images may show noise as a mosaic.

Before and after cue/review playback, the screen may become blue for a moment or images may be disturbed.

ªTo adjust volume

Adjust the speaker or headphone volume for playback.

1Move the [s /VOLr] lever to adjust the volume.

VOL

W T

Towards [r]: increases the volume

Towards [`]: decreases the volume (Nearer the bar to [r], larger the volume.)

On the remote control, press the [T] button to increase the volume or the [W] button to decrease it.

When the adjustment is completed, the volume indication will disappear.

If you do not hear the sound, check the settings of [SETUP] >> [12bit AUDIO].

ªRepeat playback

When the tape end is reached, the tape will be rewound and played back again.

1Set [ADVANCE] >> [REPEAT PLAY] >> [ON].

The [ ] indication appears. (In order to cancel the repeat playback mode, set [REPEAT PLAY] >> [OFF] or set [OFF/ON] switch to [OFF].)

When you set [USB FUNCTION] >> [WEBCAM] and then connect the USB connection cable, the repeat playback mode is canceled.

ªSettings on the audio

If you cannot listen to the desired audio when playing back a tape, check the settings in [SETUP] >> [12bit AUDIO].

When you record or dub the audio in [12bit] and set [SETUP] >> [12bit AUDIO] >> [MIX], the audio will be played back in stereo sound regardless of the settings in [AUDIO OUT].

33

VQT0N73

Page 33
Image 33
Panasonic NV-GS250GN operating instructions Playing back tape, To adjust volume, Repeat playback, Settings on the audio