Edit mode
≥The size of still pictures recorded on a card from the external input becomes [640]. (This is not
≥When recording still pictures on a card, you cannot record sound.
ªAnalog/digital conversion
When setting [ADVANCE] >> [DV OUT] >> [ON], you can output video input from other equipment in analog form to other digital video equipment connected through the DV terminal in digital form.
1Insert the DV cable
1)Other equipment (Video equipment, etc.)
2)Movie camera
3)Other digital video equipment
1) |
2) | 3) |
DV
≥A Analog signal
Other equipment (Video equipment, etc.) # Movie camera
≥B Digital signal
Movie camera # Other digital video equipment
≥When a pause or cue/review playback is activated on other equipment during analog/ digital conversion, the image may be disturbed or no image may be presented.
≥Normally, set [DV OUT] >> [OFF]. If set to [ON], the image may be disturbed.
Using the DV Cable for Recording (Digital Dubbing)
By connecting other digital video equipment with DV terminal and the movie camera by using the DV cable
recorder)
1Connect the movie camera and digital video equipment with the DV cable.
DV
1
DV
2Set [ADVANCE] >> [REC STDBY] >> [YES].
(Recorder)
≥You do not have to follow this step when the remote control is used in the digital dubbing.
3Start playback. (Player)
4Start recording. (Recorder)
Move the joystick up to select [¥/;] icon.
Or, while pressing the [¥REC] button on the remote control, press the [1] button.
¥REC A.DUB
V/REW PLAY FF/W
W
STILL ADV PAUSE STILL ADV | VOL |
STOP
5Move the joystick up to select the [¥/;] icon again or press the [;] button on the remote control to stop recording. (Recorder)
6Stop playback. (Player)
41
VQT0N73
