Panasonic NV-VP31 manual Recording from DVD to VHS, Manual Dubbing, One-Touch Dubbing

Recording from DVD to VHS

You can record the contents of the disc onto a video cassette.

≥Select the unit viewing channel (or the AV input) on the TV. ≥Insert a video cassette with an intact erasure prevention tab. ≥Switch [VHS/TV/DVD] to “VHS”.

≥Select the desired tape speed (lpage 16).

	VHS/DVD/TV
VHS/DVD	TV		TV
		VHS	DVD
VHS/DVD QUICK REPLAY		DUBBING	REC
OUTPUT
DUBBING
		TRACKING/V-LOCK
1	2	3
4	5	6	CH
7	8	9	VOLUME
AV	0	-/- -
INDEX/SKIP		SLOW/SEARCH
NAVI			MENU
TOP MENU
DIRECT			PLAY
NAVIGATOR			LIST
	ENTER
DISPLAY			RETURN
PROG/CHECK	TIMER	PROG PLAY	JET REW
CANCEL/RESET	SUBTITLE	AUDIO	ANGLE/PAGE
MUSIC w/ PICTURE A.SRD		CINEMA POSITION MEMORY
	PICTURE	SPEED	INPUT SELECT
SPEED
PLAY MODE	REPEAT	ZOOM	SETUP

	Manual Dubbing
VHS/	Only discs not copy protected can be used.
	≥Set “On-Screen Messages” to “Off” (SETUP menulpage 41).
TV/
DVD	≥Insert the disc to be played (lpage 26). When you copy NTSC discs, select “NTSC” in “NTSC Disc
REC	Output” (SETUP menulpage 41).
	[1] Press [INPUT SELECT] repeatedly.
	Select “dc” channel.
	≥Recording is allowed only when the VHS input channel is set to “dc” (lbelow).

[2]Switch [VHS/TV/DVD] to “DVD”, then press [1](PLAY).

Start playing the disc and find the playing start point.

[3] Press [;/D].

[4]Switch [VHS/TV/DVD] to “VHS”, then press [1](PLAY).

Start playing the video cassette and find the recording start point.

[5]Press [;/D], then press [REC¥].

Put the unit in the recording standby mode.

[6]Press [;/D].

VHS recording and disc play start at the same time.

¬To stop recording

INPUTSELECT 1) Press [∫]. Recording will stop.

2) Switch [VHS/TV/DVD] to “DVD”, and press [∫]. Disc play will stop.

Notes:

≥You can select the audio channel to be recorded on the Normal audio track when dubbing a bilingual DVD (lpage 24).

≥If a copy protected disc is inserted, “COPYING OF THIS MATERIAL IS NOT ALLOWED.” is displayed on the TV screen. If you proceed with the recording, the video recorded will be distorted.

One-Touch Dubbing

[RAM[

You can copy programmes on a DVD-RAM disc to a video cassette with One-touch operation.

≥This function allows DVD-RAM discs recorded by Panasonic DVD recorders to be dubbed.

≥Insert the disc containing the programme to be copied (lpage 26).

≥This function allows you to record a whole content on a disc automatically. Confirm that the remaining tape time is sufficient for recording.

..........................................................................................................................................................................................................................................................................................................................................

While stopped, press and hold [DUBBING] for 5 seconds or more.

When the disc is played all of a content or the tape reaches its end, this unit automatically stops dubbing. ≥The message is displayed on TV screen for a few seconds when One-touch dubbing is completed.

¬To stop recording Press [∫].

¬When “ ” and “ ” is flashing

Check the settings again.

Notes:

≥In this function, the index signal is automatically added on the tape for each of the programmes.

You can find the desired programme with these index signals (lpage 21).

≥This function does not work during timer recording standby mode.

≥When the dubbing starts, “On-Screen Messages” in the SETUP menu is automatically set to “Off”. The “dc” channel is automatically selected (lbelow).

≥If you press [DUBBING] when “ ” in the unit’s display flashes (Resume function lpage 26), the

dubbing starts at the stop position memorized. ≥[VHS/DVD OUTPUT] does not work during this function. ≥This function does not work with DVD-Video.

“dc” channel

≥When the disc is played with the “dc” channel set, the TV screen displays the disc video, but the VHS/DVD output has been switched to VHS.

42