Panasonic NV-VP31 Basic Connections, Audio/Video Output Sockets, For better video from DVD

Connections

When the unit is turned on after connecting the aerial cable and the mains lead, Plug in Auto Tuning starts automatically. (NV-VP31GN only)

Basic Connections

The following connections are required to record the video cassette and play back the video cassette/discs through the TV.

≥Refer to the TV’s operating instructions.

≥Turn the TV off and disconnect its AC mains lead.

TV Set (Not supplied) Aerial

(Not supplied)

To mains supply				Aerial Connector
	COMPONENT VIDEO					IN
AC IN ~	(NTSC 480P/480I PAL 576I)		R-AUDIO-L	VIDEO
	Y PB	PR			AV1 IN
DIGITAL AUDIO
(PCM/BITSTREAM)
DVD OUT
					VHS/DVD	OUT
OPTICAL	R-AUDIO-L	VIDEO S VIDEO	R-AUDIO-L	VIDEO	OUT	RF

Audio/Video Output Sockets

≥Set the RF output channel of the unit to “ss” (RF OFF) (lpage 11).

≥Connect audio/video cables directly to your TV. The video signals on DVDs and video tapes have copyright protection. The video may not be shown correctly if you connect through an A/V selector or other equipment.

	AUDIO VIDEO
	IN	IN
	L	R
Audio/video cable	Television

(Supplied)

	COMPONENT VIDEO
AC IN ~	(NTSC 480P/480I PAL 576I)
	Y	PB	PR
DIGITAL AUDIO
(PCM/BITSTREAM)
DVD OUT
OPTICAL	R-AUDIO-L		VIDEO

S VIDEO

R-AUDIO-L VIDEO

AV1 IN

VHS/DVD

OUT

R-AUDIO-L VIDEO

For better video from DVD

Y PB PR

COMPONENT	Video cable (Not supplied)
VIDEO IN
Television

COMPONENT VIDEO terminal (progressive out)

These terminals can be used for either interlace or progressive output and provide a clearer picture than the S VIDEO terminal. Connection using these terminals outputs the colour difference signals (PB/PR) and luminance signal (Y) separately in order to achieve high fidelity in reproducing colours.

≥The description of the component video input terminals depends on the TV or monitor (e.g. Y/PB/PR, Y/B-Y/R-Y, Y/CB/CR). Connect to terminals of the same colour.

¬To enjoy progressive video lpage 13

S video cable (Not supplied) S VIDEO IN

Television

S VIDEO terminal

The S VIDEO terminal achieves a more vivid picture than the VIDEO OUT terminal by separating the chrominance (C) and luminance

(Y)signals (Actual results depend on the TV). ≥Connect to a different terminal group (e.g.,

“VIDEO 2”) than that you used for the connection through this unit’s VHS/DVD OUT terminal. Picture from the VHS section will not appear when you use the same group input terminal connections because the S video terminal input takes precedence.

≥These connections are for the DVD section only.

Carry out the Basic Connections described above to view video from the VHS section.

≥When making this connection, ensure that you connect the audio cables (not supplied) to the corresponding audio input terminals on the TV.

≥You may need to change the video-input mode on the TV to view video from the VHS and DVD sections. Read your TV’s operating instructions for details.

Audio cable

(Not supplied) Television

L R

R-AUDIO-L VIDEO S VIDEO AUDIO IN

8