Playback

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Repeat Playback

Beginning of Tape

End of Recorded Part

 

 

 

At the end of the programme, the tape rewinds to the beginning of the programme and plays it

 

 

 

 

 

 

 

again (It only works if there is at least 5 seconds blank at the end of the programme). This

Repeat Playback

 

 

 

 

 

 

PLAY

 

 

 

 

 

 

repeats until you cancel it.

Control signal

 

 

 

 

 

 

 

 

 

Interruption

 

 

 

 

REW

(at least 5 sec.)

 

 

 

 

 

 

 

 

 

 

Picture Mode

This function reproduces optimum playback picture from various kind of recorded tapes and contents.

..............................................................................................................................................................................................................................................................................................................................

Press [PICTURE].

Each time you press the button, the indication changes in the following order:

[# STANDARD: Normal mode for recorded TV programmes (Initial Setting)

l;

lDYNAMIC: Clear & vivid images (e.g. for scenery and sports)

l;

lSOFT: Mild images (e.g. for rental software)

l;

{= CARTOON: Delicate images for cartoon

STANDARD

Adjusting the playback picture

Manual tracking

The unit usually makes tracking adjustments, but you may need to do it manually, if noise appears on a tape recorded on other equipment.

..............................................................................................................................................................................................................................................................................................................................

During play, press [TRACKING/V-LOCK] I or J.

Repeat until the noise disappears.

Vertical locking adjustment

Adjust the vertical to stop the picture jiggling while paused.

..............................................................................................................................................................................................................................................................................................................................

While paused, press [TRACKING/V-LOCK] I or J.

Repeat until the jiggling stops.

¬To return to auto tracking

Press both [TRACKING/V-LOCK]I and J simultaneously.

¬To remove the noise from a paused picture Start slow play, then adjust the tracking.

Notes:

This may not work with some TV models and tapes.

You can also adjust the tracking and vertical with [CH]IJ on the unit.

NTSC Playback

Tapes recorded in the NTSC system can be played back via a PAL system TV.

To record in the NTSC system, set “NTSC INPUT SELECT” (OPTION lpage 24).

Select “on PAL TV” in “NTSC PB SELECT” to view the NTSC recording in colour (OPTION lpage 24). On some TVs, the playback picture may roll up or down. If your TV has V-HOLD control or

equivalent function, use it to adjust the picture.

Note for only NTSC Playback on PAL system TV

This function is designed to allow only the playback of tapes recorded by NTSC signals on a PAL system TV. The NTSC signal is not completely converted to a PAL signal. For this reason, images play back by this function cannot be recorded correctly on other VHS.

VHS Operations

15

Page 15
Image 15
Panasonic NV-VP31 manual Picture Mode, Adjusting the playback picture, Ntsc Playback