Panasonic NV-VP32 manual Setting Up for VHS, Press Menu Press 34 to select the menu Press Enter

Setting Up for VHS

Make basic settings for VHS. These settings are retained in memory until they are changed, even if the unit is turned off. ≥Select the unit viewing channel (or the AV input) on the TV.

≥Turn on the unit. ≥Press [VHS].

Common procedures

VHS/DVD

	AUDIO	CH	VOLUME
VHS/DVD	AV
	VHS/DVD
OUTPUT		VHS DVD
VHS			TRACKING/V-LOCK
	CANCEL/RESET		PLAY SPEED
		-/--
	INDEX/SKIP		SLOW/
		REW SEARCH FF
			PLAY

[1]Press [MENU].

[2]Press [34] to select the menu.

[3]Press [ENTER].

VHS MENU

CLOCK SET TUNER PRESET SYSTEM OPTION TAPE REFRESH

SELECT : , ENTER

END :MENU

NAVI	SLOW	MENU
DIRECT NAVIGATOR		PLAY LIST
TOP MENU
ENTER	ENTER

CLOCK SET

MENU The clock operates for at least 3 years on its backup system in the event of a power failure. After 3 years, clock back up can only be guaranteed for maximum of 1 hour.

................................................................................................................................................................................................................

DISPLAY				RETURN
PROG/CHECK
		I-TIMER		SET UP
AV ENHANCER		P.MEMORY PLAY MODE
TIMER		DVD-RAM	REC MODE	REC
		DUBBING
JET REW	PROG PLAY INPUT SELECT			VHS STATUS
GROUP	PICTURE MODE		QUICK REPLAY	DVD STATUS

[1] Set each item with [34 1].

Press [2] to return to the previous item.

At the set time (H:M) point:

≥When [34] is kept pressed, the indication changes in 30 minute steps.

≥There is no need to press [34] continuously.

................................................................................................................................................................................................................

[2]Press [MENU] to start the clock and exit the setting screen.

CLOCK SET

Y	M	D	H:M
2004	1	1	0:00

Time Reset Function

If the clock is less than 2 minutes early or late, it can easily be reset to the proper time.

Example: Resetting the clock to 12:00.00

1)Display the “CLOCK SET” screen.

2)When the current clock display on the unit is between 11:58.00 and 12:01.59, press [MENU] as soon as it is 12:00.00. This will reset the time to 12:00.00.

ªTo switch to the desired video

You can set the unit so that the VHS/DVD output is automatically switched to the device which starts playback.

1)	In the OPTION menu,
			OPTION		1/2
	select “OUT [VHS/DVD]” with [34].
		TAPE SELECT			[AUTO]
2)	Press [2 1] to change the setting.	NTSC INPUT SELECT			[AUTO]
		NTSC PB SELECT			[onPALTV]
		JET NAVIGATOR			[OFF]
3)	Press [MENU] twice to make the on-	DELETE NAVIDATA			[NO]
		OSD			[AUTO]
	screen display disappear.	OUT[VHS/DVD]			[AUTO]
		DUBBING NORMAL AUDIO [L]
		SELECT:		END :MENU

VHS: The output is only for VHS, even if you press [VHS/DVD OUTPUT], the DVD video is not shown.

MANUAL: Press [VHS/DVD OUTPUT] to switch to the desired video source. They are not switched automatically.

AUTO (Initial setting):

VHS and DVD are automatically switched depending on the manipulation or the unit operation. You may also switch them with [VHS/DVD OUTPUT].

Notes:

≥You can switch to the desired video with the above operation only when the video from this unit is viewed through the VHS/DVD OUT terminal.

≥Depending on the operation, the output may not be switched automatically even if “AUTO” is selected. In this case, press [VHS/ DVD OUTPUT] to switch it manually.

≥After setting timer recording, the output is automatically switched to DVD even if “MANUAL” is selected.

12