Panasonic NV-VP32 manual Search Functions, Jet Navigator, Press Navi, Programme

Search Functions

≥Select the unit viewing channel (or the AV input) on the TV. ≥Press [VHS].

Jet Navigator

This unit can display a list of the recorded programmes on the inserted video cassette on the TV screen. You can then select the desired programme, and this unit will quickly reach its beginning and start playback.

VHS/DVD

AUDIO	CH	VOLUME
AV
VHS/DVD
VHS	VHS DVD
		TRACKING/V-LOCK
CANCEL/ CANCEL/RESET	-/--	PLAY SPEED
RESET
		SLOW/
INDEX/SKIP	REW SEARCH FF

To save Jet Navigator data

≥The tape length of the inserted cassette must be set correctly. (l 24) ≥The unit must not be in the timer recording standby mode.

≥A programme of at least 15 minutes must be recorded on the tape.

1)Press [MENU] to display the VHS MENU.

2)Press [34] to select “OPTION” and then press [ENTER].

3)Press [34] to select “JET NAVIGATOR” and then select “ON” with [2 1].

4)Record programmes (l 16 – 19). The unit makes the list as you record.

OPTION		1/2
TAPE SELECT		[AUTO]
NTSC INPUT SELECT		[AUTO]
NTSC PB SELECT		[onPALTV]
JET NAVIGATOR		[ON]
DELETE NAVIDATA		[NO]
OSD		[AUTO]
OUT[VHS/DVD]		[AUTO]
DUBBING NORMAL AUDIO [L]
SELECT:	END :MENU

			PLAY
	NAVI		SLOW	MENU
	DIRECT NAVIGATOR			PLAY LIST
NAVI
	TOP MENU
ENTER			ENTER
	DISPLAY			RETURN
	PROG/CHECK		I-TIMER	SET UP
	AV ENHANCER		P.MEMORY PLAY MODE
TIMER	TIMER		DVD-RAM	REC
			DUBBING REC MODE
	JET REW	PROG PLAY INPUT SELECT		VHS STATUS
PROG	GROUP	PICTURE MODE QUICK REPLAY		DVD STATUS
PLAY

.............................................................................................................................................................................................................................................................................................................................

	[1] Press [NAVI].
			JET NAVIGATOR
	≥When pressing [NAVI] during playback, the playback stops
MENU		DATE	CH	ON		CATEGORY
	and the Jet Navigator list appears.	10/18	1	22:30		MUSIC
	[2]................................................................................................................................................................................................................Press [NAVI] several times to select	10/19	24	15:00		SPORT
		10/21	5	22:15
		10/23	A2	20:02
	the programme.	1 10/26	4	19:10		EDUCA
		10/27	2	20:02
	After 3 seconds, the unit starts to search for the beginning of	10/27 12 20:30
		SELECT : NAVI,			1	END : MENU
	the selected programme and the playback will start
REC	automatically.
	≥Every time you press [NAVI], the cursor shifts above.

¬To cancel the Jet Navigator list Press [MENU].

¬To delete the Jet Navigator data of a single video cassette tape

Keep [CANCEL/RESET] pressed for more than 5 seconds while the Jet Navigator list appears. “- -” appears on the list.

¬To delete all the Jet Navigator data stored in the unit’s memory (l 24)

¬To demonstrate the Jet Navigator function

Keep [NAVI] pressed for more than 5 seconds without inserting a tape.

Notes:

≥The Jet Navigator programme list displays up to 14 programmes. If you have already stored 14 programmes on a tape and then store another one, the oldest item is replaced.

≥Signals approximately 10 seconds before and after the current tape position are checked. During checking, “CHECKING JET NAVIGATOR DATA.” is displayed on the TV screen.

≥Checking cannot be performed properly where there are no signals, such as unrecorded portions of the tape. In this case, press [NAVI] at a portion of the tape where a programme has been recorded on this unit. When a signal can still not be found, the message “CAN NOT FIND JET NAVIGATOR DATA.” appears on the TV.

≥The Jet Navigator list is stored in each tape. Up to 20 tapes and 50 programmes can be registered. ≥“REMAINING PROGRAM 0 DELETE JET NAVIGATOR DATA.” appears when you try to store more

than 50 programmes. The new item is added and the oldest item is deleted.

≥“REMAINING CASSETTE 0 FOR JET NAVIGATOR DELETE JET NAVIGATOR DATA.” appears when you try to store items for more than 20 tapes. Programmes recorded without deleting data as instructed are not registered in the list.

≥The list does not appear when playing tapes recorded on other equipment. ≥When recording over the same location on a tape, it may not work correctly.

Time Stamp Function

When playback starts after searching with Jet Navigator function or index search function (l 21), recorded programming data (called Time Stamp) appears on the TV screen for approx. 5 seconds.

Note:

≥Time Stamp does not appear if the beginning of the Jet Navigator data is not recorded 10 minutes before and after the current tape position even when index signals are recorded.

CH 2 10/29. SA ON 20:02

20