Operating home theatre system devices with a single button press (operation macro function)
You can assign a sequence of up to 16 keypresses for a total of 6 different home theatre system operations which have been programmed into this remote control to a single button, so that these operations can be carried out all at once.
Setting the operation macro function
1Press "SETUP" for 3 seconds or more.
2Use the tilt button to select "PJ", and then press "ENTER".
Setting the delay time
Press "LEARN".
The delay time will increase by one second each time "LEARN" is pressed.
(Maximum 10 seconds)
Press "ENTER".
Recording different keys for the same devices
33 Press "ENTER".
44 Press the top or bottom of the tilt button to select
If the device selection is "PJ", macro 1 (MC1)/macro 2 (MC2)/macro 3 (MC3) will be recorded, and if the device selection is
5Use the tilt button to select the device to be recorded, and then press "ENTER".
6Press the keys to be recorded.
(Example: When "PLAY" is selected)
Repeat step 6.
Up to a maximum of 16 keys can be recorded.
Example: When 16 keys | ( |
( have been recorded. |
Recording keys for a different device
Press "DEVICE", use the tilt button to select another device, and then press "ENTER".
Continue to step 5
Finishing recording
Press "SETUP" twice.
If "SETUP" is pressed once, the number of keys recorded will be displayed.
Note:
When the number of keys recorded reaches 16, the remote control will automatically return to the condition in step 1. In such cases, press "SETUP" once to finish recording. The buttons that can be included in operation macros are all buttons except "LIGHT" "LEARN" and "SETUP".
If a remote control signal has been learnt for a function button, the remote control signal which has been learnt will be sent if that function button is included in an operation macro.
When an operation macro is recorded, any functions that have been set or remote control signals which have been learnt for that function button will be disabled.
10 - ENGLISH
