Operating home theatre system devices with a single button press(operation macro function)

Using the operation macro function

Clearing the operation macro

 

function

Note:

1 Press "SETUP" for 3 seconds or more.

If the distance between the remote control and the home

theatre equipment being operated is too far, or if the remote

 

control receivers of the home theatre system devices are

 

obstructed, the home theatre system devices may not work

 

correctly.

 

Check the locations and directions of the home theatre

 

system devices to make sure that they can all be operated.

 

1Press "DEVICE", use the tilt button to select "PJ" or "USER1-3", and then press "ENTER".

(Example: When "PJ" is selected)

(Example: When "USER1" is selected)

2

3

Use the tilt button to select "PJ", and then press "ENTER".

Press "ENTER".

Press the button which has the macro

 

2 recorded that you would like to use.

Press the top or bottom of the tilt button to

 

4 select "MACRO1-6?" and then press

 

"ENTER".

(Example: When "MC5" is selected)

The amount of time that will pass before the macro function is completed will vary depending on the number of keypresses which have been recorded.

5 Presstwice. "ENTER", and then press "SETUP"

Press twice.

ENGLISH - 11

Page 11
Image 11
Panasonic PT-AE1000E manual Select MACRO1-6? and then press, Presstwice. ENTER, and then press Setup