Editing displays on the LCD

When remote control signals for a home theatre system device have been learnt for the USER 1-3 function buttons, you can change the "-A-, -B-, - C-" displays on the LCD to your preferred displays.

List of characters that can be displayed

List of characters that can be displayed Upper-case letters: A-Z Numerals: 0-9 Symbols: -, +, _, Q, ?, space

1Press "DEVICE", use the tilt button to select the device, and then press "ENTER"

(Example: When “DVD”is selected)

2Press "LEARN" for 3 seconds or more.

33 Press the top or bottom of the tilt button to select "KEY EDIT?" and then press

6Press "ENTER".

To finish, press "SETUP".

Editing the device selection display

You can remove the indicators for system devices that are not being used, to reduce the number of button operations required when selecting system devices.

1Press "SETUP" for 3 seconds or more.

2Use the tilt button to select "PJ", and then press "ENTER".

3Use the tilt button to select "SRC EDIT?", and then press "ENTER".

If "ERROR" is displayed

If no signals have been learned, "ERROR" will be displayed.

4Press the function button to be changed.

4Use the tilt button to select the display to be deleted, and then press "DEVICE".

(Example: When function B is selected)

Press the left or right sides of the tilt button

5 to move to the character to be changed, and press the top or bottom of the tilt button to select the character.

:Display position

:Character select

During setting, the space character will be displayed as “ ”.

To edit another character display, repeat steps 4 and 5.

When "DEVICE" is pressed, the indicator will flash more slowly.

To delete more than one indicator, repeat step 4.

5Press "ENTER" and then press "SETUP".

Restoring indicators that have been deleted.

In step 4 above, use the tilt button to select the indicator that you would like to display again, and then press "DEVICE".

14 - ENGLISH

Page 14
Image 14
Panasonic PT-AE1000E Editing displays on the LCD, Editing the device selection display, Press Enter and then press Setup