OPTION2 settings

OPTION2

 

 

PROJECTOR ID

ALL

 

INSTALLATION

FRONT-FLOOR

 

ALTITUDE

LOW

 

DIRECTION

HORIZONTAL

 

LAMP SELECT

DUAL

 

LAMP RELAY

OFF

 

LAMP POWER

HIGH

 

RS-232C

 

 

SYSTEM INFORMATION

 

 

AUTO POWER OFF

DISABLE

 

DATE AND TIME

 

 

PASSWORD

 

 

 

 

 

MENU SELECT

 

 

CHANGE

 

PROJECTOR ID

The projector has an ID number setting function that helps the user to control two or more projectors either simultaneously or separately with a single remote control. The ID number is set to “ALL” by default. Hence the ID number need not be set when only one projector is used.

1 – 64 : The ID number is set in this range.

Note • The ID number can be set to “ALL”, or selected from “1” to “64”.

If the projectors are given ID numbers, their remote controls must be assigned the same ID numbers, respectively.

If the ID number of a projector is set to “ALL”, it can be controlled by the remote control or the PC with any ID number.

If multiple projectors are used and some of them have their IDs set to “ALL”, they cannot be controlled separately from the projectors with other ID numbers.

For details on remote control ID setting, see page 15.

INSTALLATION

Switch this setting according to the projector installation method.

FRONT-FLOOR

FRONT-CEILING

REAR-FLOOR

REAR-CEILING

ALTITUDE

The fan can be controlled in accordance with the operating conditions.

LOW : This is the standard setting.

HIGH : This is selected when using the projector at an altitude of over 1 400 m.

DIRECTION

The fan can be controlled in accordance with the direction in which the images are to be projected.

HORIZONTAL: This is the standard setting.

VERTICAL : This is selected when projecting images at a significant angle toward the vertical (more than 30 degrees from the horizontal).

 

 

V

 

H

3 0 °

3 0 °

H

 

3 0 °

3 0 °

 

V

H:HORIZONTAL

V:VERTICAL

Attention • Select the correct “DIRECTION” setting in accordance with the direction in which the images are to be projected.

Using the projector at the wrong

“DIRECTION” setting will shorten the service life of the lamps.

36

Page 36
Image 36
Panasonic PT-DW5100EL, PT-D5700EL manual OPTION2 settings, Projector ID, Installation, Altitude, Direction