Using Web Browser Control
Network config page
Click [Network set up], then [Network config] to display the Network config page.
Set this to ON to enable the DHCP client function.
Enter the IP address if DHCP server is not used.
Enter the subnet mask if DHCP server is not used.
Enter the gateway address if DHCP server is not used.
Enter the name of the projector here. Enter the host name here if it is required when the DHCP server is going to be used, for instance.
Network status page
Click [Network set up], then [Network status] to display the Network status page.
Network software version display
Set IP address display
Set subnet mask display
MAC address display
Network status display
48
