Adjusting the picture
COLOR
(1080i/60) and HDTV50 (1080i/50)
Use the F and G buttons on the projector or remote control unit to select an item, and then use the I and H buttons to change the setting for that item.
For items with bar scales, press the ENTER button or the I or H buttons to display the adjustment screen, and then use the I or H buttons to make the adjustment.
When an S-VIDEO/VIDEO signal is being input
PICTURE
PICTURE MODE 
STANDARD 
COLOR TEMP . 
STANDARD 
COLOR32
TINT32
BRIGHT32
CONTRAST 32
SHARPNESS 2
NR1
TV - SYSTEM AUTO1
STANDARD
SELECT 
ADJ 
ESC
TINT
(NTSC/NTSC 4.43/YPBPR only) This adjusts the flesh tones in the picture. Press the H button to make flesh tones more greenish, and press the I button to make the flesh tones more reddish.
signals. To strengthen the effect, press the H button. To turn it off , set to “0” by pressing the I button.
TV SYSTEM
TV SYSTEM | AUTO1 |
| [ |
|
|
| AUTO2 |
| [ |
| NTSC |
| [ |
|
|
| NTSC4 . 43 |
| [ |
When an RGB signal is being input
PICTURE
PICTURE MODE 
STANDARD 
COLOR TEMP . 
STANDARD 
BRIGHT |
|
|
| 32 |
|
| |||
CONTRAST | 32 | |||
|
|
|
|
|
SHARPNESS | 0 | |||
|
|
| ||
W - BAL | R | 32 | ||
|
|
| ||
W - BAL | G | 32 | ||
|
|
| ||
W - BAL | B | 32 | ||
SIGNAL | MODE | SVGA | ||
STANDARD |
| |||
|
| |||
SELECT |
| ADJ | ESC | |
When an YPBPR signal is being input
PICTURE
PICTURE MODE 
STANDARD 
COLOR TEMP . 
STANDARD 
COLOR | 32 | ||
|
| ||
TINT | 32 | ||
|
| ||
BRIGHT | 32 | ||
|
| ||
CONTRAST | 32 | ||
|
| ||
SHARPNESS | 2 | ||
|
|
|
|
NR | 1 | ||
|
|
|
|
SIGNAL MODE | 525I | ||
STANDARD |
| ||
|
| ||
SELECT |
| ADJ | ESC |
PICTURE MODE
PICTURE MODE 
STANDARD �
[�
DYNAMIC
[
NATURAL
Select the picture mode that best matches the image source and room conditions.
The mode best used in dark rooms is NATURAL. For rooms having regular lighting conditions in use, select STANDARD. For exceptionally bright rooms, use
DYNAMIC.
Color Hue Setting (color temperature)
COLOR TEMP . 
STANDARD 
[
HIGH
[�
LOW
This is used to adjust the white areas of the picture if they appear bluish or reddish.
BRIGHT
This adjusts the darker areas (black areas) in the picture. Press the H button if dark areas are too solid (for example, if hair is difficult to see), and press the I button if black areas are too light (grey rather than black).
CONTRAST
This adjusts the contrast of the picture. Press the H button to make the picture brighter, and press the
Ibutton to make the picture darker. (Adjust the BRIGHT setting first if required before adjusting the CONTRAST setting.)
SHARPNESS
Press the H button to make the picture details sharper, and press the I button to make the picture details softer.
Noise Reduction (NR)
(Only for
If the signal is of such poor quality that picture interference appears, you can suppress this interference by adjusting the NR (Noise Reduction), except for 750p (720p), HDTV60
PAL |
[ |
PAL - M |
[ |
PAL - N |
[ |
SECAM |
AUTO1 The projector automatically distinguishes between NTSC/NTSC 4.43/PAL/PAL60/SECAM signals.
AUTO2 The projector automatically distinguishes between NTSC/PAL-
NOTE:
BThis should normally be set to “AUTO1” or “AUTO2”. If the signal is of such poor quality that the correct format cannot be automatically distinguished, change the setting manually to the required TV system.
Basic Operation
34 | 35 |
