Panasonic PV-27DF5 manual Connections, Connecting the RF in Terminal, „ Antenna Connection, Mixer

Connections

Notes on connections

•Turn off the power supply for all components before making any connections.

•If the cables necessary for connecting a component to the system are not included with the component or available as an option, you may need to fashion a cable to suit the component concerned.

•Read the instruction manual for each system component carefully before connecting it.

Connecting the RF in Terminal

CAUTION

Overtightening “Nut type” RF coaxial cables may damage jacks. Finger tighten only.

„Antenna Connection

Connect the cable from the Antenna to the VHF/UHF terminal on the unit.

VHF	UHF
Antenna	Antenna

Mixer

„Cable Connection

Connect the cable supplied by your local cable company to the VHF/UHF terminal on the unit.

Cable Box

In from CABLE Or

Note to CABLE system installer:

This reminder is provided to call the CABLE (Cable TV) System Installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Connecting the “1, 2” AV Input Terminals

Connects VCRs and other peripheral equipment

„AV Input terminal 1 is used

Video		Audio
OUT		OUT
	R		L

Notes:

•Similar connections are available at the “1, 2” AV input terminals.

•AV Input terminal 2 is located on the front of the unit.

10
	For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo