Record mode

When the Camcorder is quick-started with the white balance on automatic, it may take some time until the white balance is adjusted if the scene being recorded has a light source different from the scene last recorded. (When the MagicPix function is used, however, the white balance of the scene last recorded is retained.)

The zoom magnification differs from when it is in the quick start standby mode and when the recording starts.

Backlight compensation function

This protects a backlit subject from being darkened.

Set to Tape/Card Recording Mode.

1Press the joystick until the icon 1 appears.

2Move the joystick right to select the backlight compensation icon [].

ª

 

 

1

 

 

 

 

 

 

The image on the screen will become brighter.

ªTo return to normal recording

Select the [] icon again.

If you operate the [OFF/ON] switch or the mode dial, the backlight compensation is canceled.

MagicPix functions

This function allows you to record color subjects in dark locations to stand out against the background.

Attach the Camcorder to a tripod, and you can record images free from vibration.

Only manual focusing can be used.

Recorded scene is seen as if frames were missed.

MagicPix function

You can record dark locations brightly in color.

0 Lux MagicPix function

You can record completely dark locations with the light of the LCD monitor.

Set to Tape Recording Mode.

1Press the joystick until the icon 1 appears.

2Move the joystick up to select the MagicPix icon [].

1

Each upward press switches the modes. OFF # MagicPix function # 0 Lux MagicPix function # OFF

3(In the case of 0 Lux MagicPix function) Rotate the LCD monitor towards the lens side.

When the LCD monitor is reversed, the Power LCD Lamp turns on and the screen is lit in white.

Record the subject while viewing it on the viewfinder.

The light of the LCD monitor reaches approx.

1.2m (3.9 feet) or less.

ªTo cancel the MagicPix function

Select the MagicPix icon until the MagicPix indication disappears.

If set in a bright place, the screen may become

whitish for a while.

The MagicPix function makes the signal charging time of CCD up to approximately 30k longer than usual, so that dark scenes invisible to the naked eye can be recorded brightly. For this reason, bright dots that are usually invisible may be seen, but this is not a malfunction.

The MagicPix function is canceled when you operate the power switch or the mode dial.

32

LSQT0973

Page 32
Image 32
Panasonic PV-GS180 Backlight compensation function, MagicPix functions, To return to normal recording