Record mode
Recording in natural colors (White balance)
The automatic white balance function may not reproduce natural colors depending on the scene or lighting conditions. If so, you can adjust the white balance manually.
≥Set to Tape/Card Recording Mode.
1Set the [AUTO/MANUAL/FOCUS] switch to [MANUAL].
AUTO
MANUAL
FOCUS
2Move the joystick down until the white balance indication appears. ([ AWB ] etc.)
MNL
AWB
3Move the joystick left or right in order to select the white balance mode.
1) | 1 AWB | 2) | 1 |
3) | 1 | 4) | 1 |
1)Auto white balance adjustment [ AWB ]
2)Indoor mode (for recording under incandescent lamps) [ 
]
3)Outdoor mode [ 
]
4)Manual adjustment mode [ 
]
ªTo restore to the automatic
adjustment
Move the joystick left or right until the [ AWB ] indication appears. Or, set the [AUTO/MANUAL/ FOCUS] switch to [AUTO].
≥When the Camcorder is turned on with the lens cap fitted, the automatic white balance adjustment may not function properly. Please turn the Camcorder on after removing the lens cap.
≥When setting both the white balance and the iris/gain, set the white balance first.
≥Whenever recording conditions change,
ªTo set the white balance manually
Select [ 
] in Step 3. Then, while viewing a white subject on the entire screen, move the joystick up to select the [ 
] indication.
ªAbout flashing of the [ 
] indication
When the manual adjustment mode is selected
≥Flashing indicates that the white balance previously adjusted is stored. This setting is stored until the white balance is adjusted again.
When white balance cannot be set in the manual adjustment mode
≥White balance may not be adjusted properly in the manual adjustment mode in dark places. If so, use the auto white balance mode.
During setting in the manual adjustment mode
≥When the setting is completed, it will remain lit.
ªAbout the white balance sensor
The white balance sensor detects the type of light source during recording.
≥Do not cover the white balance sensor during recording, or it may not function properly.
ªAbout the black balance adjustment
This is one of the 3CCD system functions that automatically adjusts the black when the white balance is set in the manual adjustment mode. When the black balance is adjusted, the screen will temporarily be black.
1 2 3
1Black balance adjustment (Flashes.)
2 White balance adjustment (Flashes.)
3 Adjustment completed (Lights up.)
37
