Menu
Menus related to taking pictures
ª[DATE/TIME]
This switches between date and time indications. ≥The Camcorder automatically records the date
and time the picture was taken on the tape. ≥You can also show or change the date/time
indication by repeatedly pressing the [DATE/ TIME] button on the remote control.
ª[AUDIO REC]
Switches the audio (PCM audio) recording systems.
[12bit]: Records audio in “12 bit 32 kHz 4 tracks”. (The original audio signals can be kept after the other audio signals are dubbed.)
[16bit]: Records audio in “16 bit 48 kHz 2 tracks”. Audio can be recorded in higher quality. (If audio signals are dubbed, then the original audio signals will be erased.)
ª[REC LAMP]
Set to [ON] and this turns the recording lamp on during recording, which indicates that recording is underway. Set to [OFF] and this does not turn on the lamp even when recording is underway.
ª[DISPLAY]
Set to [ON] and the display mode can be switched to all functions. Set to [OFF] and it can be switched to minimum display.
ª[BEEP SOUND]
Set to [ON] and confirmation/alarm beeps are issued as follows.
1 Beep
≥When you start recording ≥When you turn on the power 2 Beeps
≥When you pause recording 2 Beeps for 4 times
≥When a cassette with its erasure prevention tab set to [SAVE] is inserted, condensation occurs, and at other times. Check the sentence displayed on the screen.
Menus related to playback
ª[AV JACK]
This switches among the output settings of the AV/headphone terminal.
[OUT/Ë]: Automatically switches between AV and headphone output.
[OUT]: Use this setting when image or sound is not output normally to the TV in [OUT/Ë].
≥When using the headphone, set to [SETUP] or [BASIC] >> [AV JACK] >> [OUT/Ë]. If set to [OUT], you may hear noises on the right.
ª[REC DATA]
Set to [ON] and the settings (shutter speed, iris/ gain values, and white balance settings
≥When the [AUTO/MANUAL/FOCUS] switch is set to [AUTO], the indication [AUTO] will appear.
≥When there is no data,
≥If the Camcorder data of the Camcorder are played back on other equipment, the settings information is sometimes not displayed normally.
ª[AUDIO OUT]
This switches the sound to be played back. [STEREO]: Stereo sound (main sound and sub
| sound) |
[L]: | Left channel sound (main sound) |
[R]: | Right channel sound (sub sound) |
60
