Panasonic PV-HS3000 Code Set, Number buttons, Channel Guide, Replay Guide, Channel Up/Down, Jump

1Code Set

Used to program the remote control to operate additional home entertainment components. See “Setting Up Your Components” on page 42.

2Hard Disk Recorder

Puts the remote control in the Hard Disk Recorder mode, giving you control of the Hard Disk Recorder features and functions.

3 TV 20 SAT/CABLE 21 VCR/DVD

Puts the remote control in a particular mode—to operate your television, satellite receiver, cable box, VCR, DVD, TV/VCR Combo, or laser disk. If a component does not respond when you press a remote control button (or responds incorrectly), press the appropriate device button (HARD DISK RECORDER, TV, SAT/CABLE, VCR/DVD) first to choose which component to operate.

4Number buttons

Use the keypad (0-9) to directly select channels (for example, 09 or 31).

5Channel Guide

Displays the Channel Guide, an on-screen guide of all the channels you receive.

6Replay Guide

Displays the Replay Guide, a menu of the shows the Hard Disk Recorder has recorded for you.

7Channel Up/Down

Enable you to select the next higher (or lower) television channel.

8Return to Live

Return to live television after using PAUSE, REW, FF or STOP.

9 Select Left 27 Right 26 Up 10 Down

Control navigation (move the yellow highlight bar) around on-screen menus.

11Instant Replay

Skips back 7 seconds in a live or recorded show.

12	REW	14 PLAY/SLOW 30 FF 13 REC
34	STOP	31 PAUSE

Used to control the similar functions on your video components.

15Jump

Similar to a “Last Channel” or “Recall” button on a television remote control, allowing you to quickly jump back to the channel you were watching previously.

16Input

Press INPUT to switch the input of the chosen component. If you have more than one component connected to your television, you may have to scroll through several inputs to find the one that corresponds to the component you want to see on the screen.

17Display

Activates the on-screen display function for each of your home entertainment components.

18Red LED

Flashes red to indicate that the remote control is working and sending a signal.

19POWER

Turns on or off the currently selected video component (Hard Disk Recorder, TV, VCR, cable box, or a re-assigned video component).

22Enter

Operates the same way as the Enter button on your original television remote control. If your television remote control required you to use an Enter button to change channels, use the ENTER button on the Hard Disk Recorder remote control after entering the appropriate channel number.

23Replay Zones

Takes you to the screen where you can create a Theme-based Replay channel and channels from topical television categories collected by the ReplayTV Service.

24Volume Up/Down

Raises or lowers the sound volume on your television.

25Mute

Turns television sound on or off.

28Select

Use to choose options from a selected component’s menu or guide.

29QuickSkip

Skips forward 30 seconds in a recorded show, allowing you to jump ahead through unwanted parts of the show. Also works for a live broadcast if you have used the STOP, PAUSE, or REW buttons.

32Exit

Exit a selected component’s on-screen menu or guide.

33TV/VCR

This button works the same way as the TV/VCR button on your original VCR remote control. It also controls the following functions in other modes: TV mode = TV/VIDEO; CABLE mode = A/B.

35Menu

Press MENU to access the menu of your chosen component.

59

PanaHDR- P42-.p65 59 00/12/01, 16:41