
7 Press Number buttons to enter the dialing prefix, then press PLAY to move to the next screen.
•Press DISPLAY for *; press ENTER for #; and press PAUSE for ,.
•Some telephone systems must dial a special number prior to placing a phone call, to disable call waiting for example. If your phone system requires a special number, enter it on this screen.
8 The Hard Disk Recorder calls the ReplayTV Service to retrieve local telephone numbers and TV channels.
•You are notified of the progress of the connection, and if any errors occur during the connection.
•This connection to the ReplayTV Service lasts about 5 minutes.
•The internal Hard Disk Recorder clock and time zone are set during this connection.
•This connection also provides the Hard Disk Recorder with TV channel information for your local area.
If the connection failed,
Press PLAY to try connecting again.
Or, press REW repeatedly to return to the previous screen and confirm each setting item. Then,
9 Press /
to select your local number, then press PLAY to move to the next screen.
•The ReplayTV Service finds local phone numbers based on the information you provided.
•You can change the number later by pressing MENU and selecting “ Setup” and then “Change Dialing & Input Settings.”
10 Press /
to select the dialing method, then press PLAY to move to the next screen.
•Choose the dialing method for your area. For example, a direct call, or if you need to dial a prefix and/or area code.
11 Press /
to select the device you have connected to the LINE 1 input, then press PLAY to move to the next screen.
•If nothing is connected to LINE 1, just press PLAY.
7 Number buttons
ENTER
9/
10buttons
11
7 PLAY
9
10
11
PAUSE
REW
MENU
DISPLAY
NOTE
•“Other” is reserved for future devices that may be connected to the Hard Disk Recorder.
If you select any components, the setup screen appears.
Refer to “Completing the IR Blaster Setup” section on page 21. Continued on the next page.
19
PanaHDR | 19 | 00/12/01, 16:37 |