Listening to the radio
You can preset up to 30 channels.
Preparation
≥Make sure that the FM antenna is connected. (l p. 6)
≥Turn the unit on.
≥Press [RADIO/AUX] to select “FM”.
≥A station previously stored is overwritten when another station is stored in the same channel preset.
Presetting stations automatically
1 Press [PLAY MENU] to select “A.PRESET”.
2 Press [3, 4] to select “LOWEST” or
“CURRENT” and then press [OK].
LOWEST:
To begin auto preset with the lowest frequency (FM 87.9 or FM 87.5).
CURRENT:
To begin auto preset with the current frequency.*
{.The tuner starts to preset all the stations it can receive into the channels in ascending order.
*To change the frequency, refer to “Manual tuning and presetting”.
Listening to a preset channel
1 Press [PLAY MENU] repeatedly to select “TUNEMODE”.
2 Press [3, 4] to select “PRESET” and then press [OK].
3 Press [:/6] or [5/9] to select the channel.
∫Manual tuning and presetting
Select a radio broadcast. |
| |
1 | Press [PLAY MENU] repeatedly to select |
|
| “TUNEMODE”. |
|
2 | Press [3, 4] to select “MANUAL” and then |
|
| press [OK]. |
|
3 | Press [:/6] or [5/9] to tune to the | ENGLISH |
| scrolling. Tuning stops when a station is found. | |
| required station. |
|
| ≥ To start automatic tuning, press and hold |
|
| [:/6] or [5/9] until the frequency starts |
|
To preset the channel
4While listening to the radio broadcast, press [OK].
5Press [3, 4] to select the channel and then press [OK].
∫To improve FM sound quality
1While receiving FM broadcasts, press [PLAY MENU] repeatedly to select “FM MODE”.
2Press [3, 4] to select “MONO” and then press [OK].
≥This setting can be preset and memorized. To do so, continue to step 4 of “Manual tuning and presetting”.
≥Select “STEREO” in step 2 to return to stereo broadcasts.
≥“MONO” is canceled if the frequency is changed.
∫To display the current signal status
Press [DISPLAY].
“FM ST”: | The FM signal is tuned and in stereo. |
“FM”: | There is no tuned signal or the FM |
| signal is in monaural. |
“FM MONO”: “MONO” is selected in step 2 of “To improve FM sound quality” (l above).
≥“STEREO” is displayed when this unit tunes to a stereo broadcast.
11
RQT9882