CAUTION

RISK OF ELECTRIC SHOCK

DO NOTOPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE SCREWS.

NO USER-SERVICEABLE PARTS

INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Product Identification Marking is located on the bottom of the unit.

Conforms to UL STD 60065.

Certified to CAN/CSA STD C22.2 No.60065.

-If you see this symbol-Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union.

If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.

Except for Canada

(Inside of product)

THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm (7 7/8q) or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).

THE FOLLOWING APPLIES ONLY IN THE

 

U.S.A.

 

FCC Note:

 

This equipment has been tested and found to comply

 

with the limits for a Class B digital device, pursuant to

 

Part 15 of the FCC Rules.

 

These limits are designed to provide reasonable

 

protection against harmful interference in a residential

 

installation. This equipment generates, uses and can

 

radiate radio frequency energy and, if not installed and

ENGLISH

used in accordance with the instructions, may cause

 

harmful interference to radio communications.

 

However, there is no guarantee that interference will

 

not occur in a particular installation. If this equipment

 

does cause harmful interference to radio or television

 

reception, which can be determined by turning the

 

equipment off and on, the user is encouraged to try to

 

 

correct the interference by one or more of the following

 

measures:

 

≥Reorient or relocate the receiving antenna.

≥Increase the separation between the equipment and receiver.

≥Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

≥Consult the dealer or an experienced radio/TV technician for help.

Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation.

Responsible Party:

Panasonic Corporation of North America

Two Riverfront Plaza, Newark, NJ 07102-5490

Support Contact: http://www.panasonic.com/contactinfo

THE FOLLOWING APPLIES ONLY INCANADA

This device complies with RSS-210 of the IC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference,

(2)This device must accept any interference received, including interference that may cause undesired operation of this device.

THE FOLLOWING APPLIES ONLY IN

CANADA

CAN ICES-3(B)/NMB-3(B)

3

RQT9882