Connections

1 Connect the antenna.

Adhesive tape (not supplied)

FM indoor antenna (supplied)

Connect the AC power supply cord after all other connections are completed.

This unit consumes a small amount of AC power (l p. 20) even when turned off.

≥In the interest of energy conservation, if you will not be using this unit for an extended period of time, unplug it from the AC outlet.

To an AC outlet

AC power supply cord (supplied)

≥These speakers do not have magnetic shielding. Do not place them near a TV, personal computer or other magnetic devices.

≥Tape the antenna to a wall or column in a position with the least amount of interference.

≥To improve FM radio reception in low signal areas, an external antenna (not supplied) can be connected using a “right angle Quick Disconnect “F” type connector” (not supplied).

Connect an external music device

1 Connect an external music device using an

audio cable (not supplied).

≥Plug type: ‰3.5 mm (1/8q) stereo

2 Press [RADIO/AUX] to select “AUX” and start

playback on the connected device.

∫To select the sound input level of the external device

1While in AUX mode, press [SOUND] repeatedly to select “INPUT LEVEL”.

2Press [3, 4] to select “NORMAL” or “HIGH” and then press [OK].

≥ The factory default is “NORMAL”.

Audio cable (not supplied)

≥To improve sound distortion when “HIGH” is selected, select “NORMAL”.

≥Switch the equalizer off or turn the volume of the external device down to reduce the input signal. High level of input signal will distort the sound.

≥For details, refer to the owner’s manual of the device.

6

RQT9882