Panasonic SC-HC39 Attaching the unit to a wall (optional), Installation accessories, ∫Supplied accessories, ∫Additionally required accessories, (commercially available)

Attaching the unit to a wall (optional)

This unit can be wall mounted using the supplied wall mount brackets, etc. Make sure that the wall and the screws used for securing to the wall are capable of supporting at least 33 kg (72.8 lbs). The screws and other items are not supplied as the type and size will vary with each installation.

≥Refer to step 5 of “Wall mount instructions” for details about the required screws.

≥As an additional protective measure, attach the unit to the wall with the fall prevention cord.

Installation accessories

∫Supplied accessories

≥1 Safety holder ≥1 Screw

≥2 Wall mount brackets

∫Additionally required accessories

(commercially available)

≥4 Wall mount bracket fixing screws

≥1 Safety holder fixing screw

≥1 Fall prevention cord*

≥1 Screw eye

*Use a cord that is capable of supporting over 33 kg (72.8 lbs) (with a diameter of about 1.5 mm (1/16q)).

≥Keep the safety holder out of reach of children to prevent swallowing.

≥Keep the screws out of reach of children to prevent swallowing.

≥Keep the wall mount brackets out of reach of children to prevent swallowing.

Wall mount instructions

Before installation, turn the unit off and disconnect the AC power supply cord from the AC outlet.

1 Detach the stand from the unit.

≥Unscrew the fixing screw at the bottom of the unit.

≥Gently pull the stand off the unit as illustrated.

≥Keep the removed screw and the stand in a safe place.

Stand

Fixing screw

Soft blanket or cloth

Safety precautions

Professional installation is required.

The installation should never be done by any other than a qualified installation specialist.

PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND/OR SERIOUS INJURY, INCLUDING DEATH RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING.

WARNING:

To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation instructions.

2 Fix the safety holder onto the unit with the

screw (supplied).

≥Screw tightening torque: 50 N0cm (0.4 lbf0ft) to 70 N0cm (0.5 lbf0ft).

Screw (supplied)

3 Attach the fall prevention cord (not supplied) to

this unit.

Cord

(not supplied)

18

RQT9882