Others
Auto off function
As a factory default, this unit will turn to standby mode automatically if there is no sound and it is not being used for approximately 20 minutes.
To cancel this function
1 Press [SETUP] repeatedly to select
“AUTO OFF”.
2 Press [3, 4] to select “OFF” and then press
[OK].
≥To turn the function on, select “ON” in step 2.
≥This setting cannot be selected when “FM” is the source.
≥When connected to a Bluetooth® device, the function does not work.
Bluetooth® standby
When
1 Press [SETUP] repeatedly to select
“BLUETOOTH STANDBY”.
2 Press [3, 4] to select “ON” and then press
[OK].
≥To turn the function off, select “OFF” in step 2.
Changing the unit and remote control code
When other Panasonic equipment responds to the supplied remote control, change the remote control code.
1 | Press [CD] to select “CD”. | ENGLISH | ||
2 | While pressing and holding [SELECTOR] on | |||
| ||||
| the unit, press and hold [CD] on the remote |
| ||
| control until the unit’s display shows |
| ||
| “REMOTE 2”. |
| ||
3 | Press and hold [OK] and [CD] on the remote |
| ||
| control for at least 4 seconds. |
| ||
|
|
|
|
≥To change the mode back to “REMOTE 1”, press [CD] to
select “CD” and then repeat the step 2 and 3 but replace [CD] with [ ].
Software update
Occasionally, Panasonic may release updated software for this unit that may add or improve the way a feature operates. These updates are available free of charge.
For more details, refer to the following website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
∫Checking the software version
The version of the installed software is displayed.
Press [SETUP] repeatedly to select “SW VER.” and then press [OK].
≥Press [OK] to exit.
13
RQT9882