Sound adjustment
The following sound effects can be added to the audio output.
1 Press [SOUND] repeatedly to select the effect.
2 Press [3, 4] to select the setting and then
press [OK].
“PRESET EQ” | “HEAVY” (heavy), “SOFT” |
(Preset | (soft), “CLEAR” (clear), |
Equalizer) | “VOCAL” (vocal) or “FLAT” |
| (flat/off). |
| ≥ The factory default is “HEAVY”. |
|
|
“BASS” (Bass) or | Adjust the level (j4 to i4). |
“TREBLE” (Treble) |
|
|
|
“D.BASS” | “ON D.BASS” or |
(Dynamic Bass) | “OFF D.BASS”. |
| ≥ The factory default is |
| “ON D.BASS”. |
|
|
“SURROUND” | “ON SURROUND” or |
(Surround) | “OFF SURROUND”. |
≥The factory default is “OFF SURROUND”.
≥You may experience a reduction in sound quality when these effects are used with some sources. If this occurs, turn the sound effects off.
≥When “AUX” is selected as the source, you can select “INPUT LEVEL” to adjust the sound input level of the external device. (l p. 6)
Clock and Timer
Setting the clock
This is a
1 Press [SETUP] repeatedly to select “CLOCK”.
2 Press [3, 4] to set the time and then press [OK].
≥To display the clock, press [SETUP] repeatedly to select “CLOCK” and then press [OK] once. The time is displayed for 10 seconds. (During standby, press [DISPLAY] once.)
≥The clock is reset when there is a power failure or when the AC power supply cord is removed.
≥Reset the clock regularly to maintain accuracy.
12
Play timer
You can set the timer so this unit turns on at a certain time every day.
Preparation
Set the clock.
∫Setting the timer
1Press [SETUP] repeatedly to select “TIMER ADJ”.
2Press [3, 4] to set the starting time (“ON TIME”) and then press [OK].
3Press [3, 4] to set the finishing time (“OFF TIME”) and then press [OK].
4Press [3, 4] to select the music source* and then press [OK].
∫Turning the timer on
1Prepare the selected music source and set the desired volume.
2Press [SETUP] repeatedly to select “TIMER SET”.
3Press [3, 4] to select “SET” and then press [OK].
≥“F” is displayed.
≥To turn the timer off, select “OFF”.
4Press [Í] to turn the unit to standby mode.
≥To display the timer settings, press [SETUP] repeatedly to select “TIMER ADJ” and then press [OK] once.
The music source and volume will also be displayed if the timer is turned on.
≥During standby, if the timer is turned on, press [DISPLAY] twice to display the settings.
≥This unit can be used as normal after the timer is set, however:
–Turn the unit to standby mode before the timer start time.
–Even if the audio source or the volume is changed, the timer will still use the audio source and volume that was set when the timer was turned on.
* “CD”, “FM” and “AUX” can be set as the music source.
Sleep timer
The sleep timer can turn the unit off after a set time.
1 Press [SETUP] to select “SLEEP”.
2 Press [3, 4] to set the time (in minutes) and then press [OK].
“SLEEP 30” ,. “SLEEP 60” ,. “SLEEP 90” ,. “SLEEP120”
^ | ||
|
|
|
≥The remaining time is indicated on the unit’s display except when other operations are performed.
≥The play timer and sleep timer can be used together. The sleep timer is always the main timer on the unit.
RQT9882